EasyJtag Suite ver.: 2.0.7.3 / wxWidgets 3.1.0-W-U started.
Operating system ver.: Windows 7 (build 7601, Service Pack 1).
EasyJtag API ver.: 1.0.9.0
Android Explorer ver.: 1.1.0.12
eMMC ODIN ver.: 1.0.11.6
Successfully connected to box on COM45
Box S/N: ****************, ,FW Ver.: 01.52
Box Working Mode: JTAG Box.
Box Drivers version: 3.0.0.0, are OK
Z3X Card Serial : **************** , ver: 22
Z3X Card Activation [LG] : ****************
Z3X Card Activation [SAMS] : ****************
Z3X Card Activation [JTAG] : ****************
Z3X EasyJtag Software ver. 2.0.7.3
Loading eMMC Addon Firmware... IO: 3300 mV
Box S/N: ****************, ,FW Ver.: 01.52
CMD Pullup Level:1433 mV
CMD Active Level:1711 mV
HiPower™ mode is off!
eMMC Device Information
EMMC CID : 15010053355530304D0213261A679092
EMMC CSD : D02701320F5903FFF6DBFFE18E404028
EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 09/2013 Rev.0x2
EMMC NAME: S5U00M , S/N: 321264231
EMMC NAME (HEX): 53355530304D00
EMMC ROM1 (Main User Data) Capacity: 3728 MB
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD rev 1.5 (MMC 4.41)
Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured.
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x00.
H/W reset function [RST_N_FUNCTION]: 0x00
Backup saved: S5U00M_ 321264231_20160309_1828.extcsd
Done.
Z3X EasyJtag Software ver. 2.0.7.3
Loading eMMC Addon Firmware... IO: 3300 mV
Box S/N: ****************, ,FW Ver.: 01.52
CMD Pullup Level:2340 mV
CMD Active Level:2629 mV
HiPower™ mode is off!
eMMC Device Information
EMMC CID : 15010053355530304D0213261A679092
EMMC CSD : D02701320F5903FFF6DBFFE18E404028
EMMC Manufacturer ID: 0015 , OEM ID: 0100
EMMC Date: 09/2013 Rev.0x2
EMMC NAME: S5U00M , S/N: 321264231
EMMC NAME (HEX): 53355530304D00
EMMC ROM1 (Main User Data) Capacity: 3728 MB
EMMC ROM2 (Boot Partition 1) Capacity: 2048 kB
EMMC ROM3 (Boot Partition 2) Capacity: 2048 kB
EMMC RPMB (Replay Protected Memory Block) Capacity: 128 kB
EMMC Permanent Write Protection: No
EMMC Temporary Write Protection: No
Extended CSD rev 1.5 (MMC 4.41)
Boot configuration [PARTITION_CONFIG: 0x00] No boot partition configured.
Boot bus config [177]: 0x00 , width 1bit , Partition config [179]: 0x00.
H/W reset function [RST_N_FUNCTION]: 0x00
Backup saved: S5U00M_ 321264231_20160309_1829.extcsd
Searching for partition tables...
Detected MBR...
Disk Signature: 00000000
MMCBLK0P0 Type: Unknown:0x4d Start: 200 Len: 5000
MMCBLK0P1 Type: Unknown:0x45 Start: 5200 Len: 25800
MMCBLK0P2 Type: WIN95 FAT32 (LBA) Start: 2AA00 Len: 2800000
MMCBLK0P3 Type: Extended Start: 282AA00 Len: E67D5600
Warning: Extended Partition Detected - this feature not tested
MMCBLK0P4 Type: Unknown:0x46 Start: 4000000 Len: FA000
MMCBLK0P5 Type: Unknown:0x47 Start: 40FA000 Len: 7D000
MMCBLK0P6 Type: Unknown:0x48 Start: 436B000 Len: D42000
MMCBLK0P7 Type: Linux Start: 59AD000 Len: 1AE00000
MMCBLK0P8 Type: Unknown:0x49 Start: E62FD000 Len: 500000
Done.
Z3X EasyJtag Software ver. 2.0.7.3
Skip loading eMMC Addon Firmware
CMD Pullup Level:2340 mV
CMD Active Level:2629 mV
Output file :C:\Users\f0ou4d\Desktop\Q7A+ emmc dump\EMMC_ROM1_00000000_20000000.bin
Reading 0x000020000000 bytes from 0x000000000000 ...ROM1 ( USER ROM)
Done. Read Speed: 635 kB/s
Z3X EasyJtag Software ver. 2.0.7.3
Skip loading eMMC Addon Firmware
CMD Pullup Level:2340 mV
CMD Active Level:2629 mV
Output file :C:\Users\f0ou4d\Desktop\Q7A+ emmc dump\EMMC_ROM2_00000000_00200000.bin
Reading 0x000000200000 bytes from 0x000000000000 ...ROM2 ( BOOT1 ROM)
Done. Read Speed: 627 kB/s
Z3X EasyJtag Software ver. 2.0.7.3
Skip loading eMMC Addon Firmware
CMD Pullup Level:2340 mV
CMD Active Level:2629 mV
Output file :C:\Users\f0ou4d\Desktop\Q7A+ emmc dump\EMMC_ROM3_00000000_00200000.bin
Reading 0x000000200000 bytes from 0x000000000000 ...ROM3 ( BOOT2 ROM)
Done. Read Speed: 651 kB/s
Firmware file...C:\Users\f0ou4d\Desktop\Q7A+ emmc dump\eMMC_Firmware.bin
Running:SAMSUNG: MoviNAND Firmware extraction...
Z3X EasyJtag Software ver. 2.0.7.3
Skip loading eMMC Addon Firmware
CMD Pullup Level:2258 mV
CMD Active Level:2361 mV
Reading...
Done.
