مشكلة في تحديث atf

ZEBBAR03

:: Reseller ::
إنضم
17 مارس 2014
المشاركات
433
مستوى التفاعل
981
النقاط
0
الإقامة
بن يمينة اولاد يعيش البليدة
ATF Box is not in USB 2.0 Mode
==============================================

* Go to "Product Support" tab and click the
* "Restore Box" Button to fix the Box Firmware

** If Problem is Not Solved...
1. Make Sure you are NOT using USB HUBS
2. Make Sure your USB port is USB 2.0
3. Make Sure you are using the latest Drivers

*** If Problem is STILL Not Solved
1. Use a THICKER USB Cable
2. Connect ATF Directly to the Root USB Port
3. Uninstall Drivers, Reboot PC, Reinstall

**** If you are still Stuck...
1. Search your entire PC for "ftdibus.sys
2. Delete all "ftdibus.sys" files you find
3. Reboot PC...
4. Disconnect ATF Box and all Boxes from PC
5. Run C:\AdvanceBox Turbo Flasher\Driver\Remove_ATF_Drivers\Remove_ATF_Drivers.bat
6. ReInstall ATF Software
7. Connect ATF Bo:no::no:x Only to your USB Port
8. Install the Correct Drivers

************************************************
INIT : FAILED , CHECK YOUR BOX FIRMWARE
 

DZ-Developer

:: الإدارة R&D ::
إنضم
28 أبريل 2012
المشاركات
6,597
مستوى التفاعل
30,632
النقاط
113
الإقامة
الجزائر الغالية
ATF Box is not in USB 2.0 Mode
==============================================

* Go to "Product Support" tab and click the
* "Restore Box" Button to fix the Box Firmware

** If Problem is Not Solved...
1. Make Sure you are NOT using USB HUBS
2. Make Sure your USB port is USB 2.0
3. Make Sure you are using the latest Drivers

*** If Problem is STILL Not Solved
1. Use a THICKER USB Cable
2. Connect ATF Directly to the Root USB Port
3. Uninstall Drivers, Reboot PC, Reinstall

**** If you are still Stuck...
1. Search your entire PC for "ftdibus.sys
2. Delete all "ftdibus.sys" files you find
3. Reboot PC...
4. Disconnect ATF Box and all Boxes from PC
5. Run C:\AdvanceBox Turbo Flasher\Driver\Remove_ATF_Drivers\Remove_ATF_Drivers.bat
6. ReInstall ATF Software
7. Connect ATF Bo:no::no:x Only to your USB Port
8. Install the Correct Drivers

************************************************
INIT : FAILED , CHECK YOUR BOX FIRMWARE

1429866934691.png
 

DZ-Developer

:: الإدارة R&D ::
إنضم
28 أبريل 2012
المشاركات
6,597
مستوى التفاعل
30,632
النقاط
113
الإقامة
الجزائر الغالية
شكرا صديقي لكن جربت هذا الحل Advance-Box Secure AES-128 Channel


Open Port Success...

Error return code 6

Error return code

Elapsed time = 00:00:00

إذن تابع الحلول الموضوعة أساسا في البيانات التي وضعتها في الموضوع:
إعمل أولا على آخر إصدار للواجهة 12.12
الحلول المقترحة في بيانات العملية:

الحل الأول:

Go to "Product Support" tab and click the
"Restore Box" Button to fix the Box Firmware

الحل الثاني:

** If Problem is Not Solved...
1. Make Sure you are NOT using USB HUBS
2. Make Sure your USB port is USB 2.0
3. Make Sure you are using the latest Drivers

الحل الثالث:

*** If Problem is STILL Not Solved
1. Use a THICKER USB Cable
2. Connect ATF Directly to the Root USB Port
3. Uninstall Drivers, Reboot PC, Reinstall

الحل الرابع:

**** If you are still Stuck...
1. Search your entire PC for "ftdibus.sys
2. Delete all "ftdibus.sys" files you find
3. Reboot PC...
4. Disconnect ATF Box and all Boxes from PC
5. Run C:\AdvanceBox Turbo Flasher\Driver\Remove_ATF_Drivers\Remove_ATF_Drive rs.bat
6. ReInstall ATF Software
7. Connect ATF Box Only to your USB Port
8. Install the Correct Drivers




 
أعلى