ماهي طريقة تفليش Telsda t528 MStar 16mb

gsmaroc

عضو نشط
إنضم
2 مارس 2015
المشاركات
28
مستوى التفاعل
7
النقاط
0
Available Ports:COM3 COM5
Current Port:COM5
Detection initiated...
Vcc: null
Gnd: null
Analyzing D+ and D-...
Failed to detect.
Pinouts are not fonud!
If the phone ready to read and write again, please re-plug the USB or reset the pinouts.
If the phone ready to read and write again, please re-plug the USB or reset the pinouts.
>>If the phone ready to read and write again, please re-plug the USB or reset the pinouts.
 

gsmaroc

عضو نشط
إنضم
2 مارس 2015
المشاركات
28
مستوى التفاعل
7
النقاط
0
alhamdolilah 7olat mochkila
Detection initiated...
Vcc: null
Gnd: 5
Analyzing D+ and D-...
D+ = 3, D- = 2
Detection D+/D- with 0,94 seconds!
Analyzing USB device, please wait...
Found [MSTAR]USB device:GCREADER USB Device,(VID_1B20&PID_0300)
Setting...
Find USB device:GCREADER USB Device, (VID_1B20&PID_0300)
Pinouts setting complete!
Connecting to phone...
Connection success!
Boot downloading...
CPU ID:00508003

Boot downloading overtime(3),please re-select other boot file, or USB reset.
Boot downloading error(2),please re-select other boot file, or USB reset.
If the phone ready to read and write again, please re-plug the USB or reset the pinouts.
If the phone ready to read and write again, please re-plug the USB or reset the pinouts.
Connecting to phone...
Connection success!
Boot downloading...
CPU ID:00508003
Boot downloading finished.
Flash Type: WINBOND_W25Q128BV
Flash ID: 00EF401800000000
Flash Size: 01000000h
CPU : 8533d/8532_series
Flash Erasing finished
>>Flash Writing finished.
 
أعلى