مساعدة طلب ملف pm لنوكيا 5800 rm 427

[khaled4701]

السلام عليكم لدي منطقة السيكيريتي مضروبة واحتاج ملف بي ام لهذا الهاتف علما انه صيني

 

[El_Hakim_Gsm]

لا ليس صيني مقلد اخي هذا اصلي.
على اي بوكس تعمل .

 

[khaled4701]

على الباست bb5 وهذا انفو الجهاز
Reading Phone Info....
Connected phone - Nokia 5800 XpressMusic
Software ver : V ICPR72_09w20.5.4 23-04-10 RM-427 (c) Nokia
IMEI : 359308025243761
XappVer : 000007C6
DSP Ver : ICPR72_09w19_1
PPM :
CNT :
Product SN : CBJ666295
Product code : 0559677
Base Prd.code: 0559230
Long Prod.SN : 0
Hardware info=======
HWID : 0702
Retu : 16
Tahvo : 22
Batery: 4654 mV
RF ic : 17141715
Lock info ===========
IMEI : 359308025243761
IMEI spNet :
IMEI svNet :

Conf key : 0000000000000000
Provider key : 2440700000000000
Country : Finland
Operator : NOKIA (Open)
Counters : Key 0 [3] , Fbus 0 [10]
Blocks : 7

LOCK STATUS :
=============================
BLK : 1
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 2
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 3
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 4
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 5
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 6
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
BLK : 7
Lock1:Open Lock2:Open Lock3:Open Lock4:Open Lock5:Open
=============================
LOCKS : All Open
=============================
User code : Crypted
UserDataExLevel : Low [Gallery] , FullFlash method

Done!

 

[khaled4701]

وهذا سالف تاست اخي
Initializing Tests...
IMEI : 359308025243761 , Phone : RM-427 Nokia 5800 XpressMusic
Get keys...
PASSED | ST_UEM_CBUS_IF_TEST
PASSED | ST_EAR_DATA_LOOP_TEST
PASSED | ST_SIM_CLK_LOOP_TEST
PASSED | ST_SIM_IO_CTRL_LOOP_TEST
PASSED | ST_SIM_LOCK_TEST
MINOR | ST_SECURITY_TEST
PASSED | ST_PWR_KEY_TEST
PASSED | ST_CURRENT_CONS_TEST
PASSED | ST_BACKUP_BATT_TEST
->ERROR | ST_RADIO_TEST
PASSED | ST_HOOKINT_TEST
PASSED | ST_BTEMP_TEST
->ERROR | ST_MBUS_RX_TX_LOOP_TEST
PASSED | ST_AMB_LIGHT_SENSOR_TEST
PASSED | ST_IIC_TEST
PASSED | ST_EXT_DEVICE_TEST
PASSED | ST_CDSP_SLEEPCLK_FREQ_TEST
PASSED | ST_CDSP_SLEEPCLOCK_FREQ_TEST
PASSED | ST_CDSP_RF_BB_IF_TEST
PASSED | ST_CDSP_RF_SUPPLY_TEST
PASSED | ST_CDSP_TX_IQ_TEST
PASSED | ST_CDSP_TXC_DATA_TEST
PASSED | ST_CDSP_RX_PLL_PHASE_LOCK_TEST
PASSED | ST_CDSP_TX_PLL_PHASE_LOCK_TEST
PASSED | ST_CDSP_RX_IQ_LOOP_BACK_TEST
PASSED | ST_CDSP_GSM_TX_POWER_TEST
SelfTests end

 

[khaled4701]

Read and Check phone data...
SDD Key status : SDData is Ok
CMLA Key status : CMLA key Not exist
SimLock status : SimLock is Ok

Security status : Security Damaged!!!!!
- > Do Local SX4 or Server SX4 , Upload Tune ( checkbox or manual )

-----------------------

PA_SimLock Version :
PA_SL2 phone detected

Setting FlashMode
FlashMode set Ok

1st boot Ok, C0

CMT part info :
CMT ASICID : 000000010000022600010006400C192101031105
CMT EM0 ID : 00000296
CMT EM1 ID : 00000B22
CMT PUB ID : 0AA00017187C0052FF32EEB04AB4221582D318A3
CMT MODE ID : 00
CMT R_HASH : F2D76DFAFD66C7F195F278417DF05888
CMT ROM ID : 4B9B75103E691FF8

CMT : Sending 2nd loader...
Use : RAPIDOv11_2nd.fg , Rev : 0.0 Ver : 1.37.1
CMT Loader sent, Boot Ok
MCU Configuration
MCU Cfg Ok , 03
FLASHID : 004000EC , CMT , NAND
CMT Flash ID : 004000EC < SAMSUNG [SEC] => KAT00F00RA [NAND]
FLCNT : 00030000000000000000000000000000000000
FLASHID : 0000FFFF , CMT , MMC , EXT
CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok
Sending ALGO....
Use : RAPIDOv11_algo.fg , Rev : 0.0 Ver : 1.40.0
CMT Algo sent
CMT PAPUB : 76A20187051C30162EE91C77AE5E6011F5F1BA6190
Transmission mode : Dual (Ddr, TX2)

Boot Done!

PrReq : NOR , 00
PrReq : NAND , 000300000000010000000100000000

Init Service mode... Wait...

Connect phone on selected interface...
Phone found!
Series 60 Device detected!
read info... - Ok



Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info... - Ok

 

[El_Hakim_Gsm]

جرب تفلش الجهاز
فول فلاش .مع التعليم على
Factory Reset

...
ثم ارفع تشيك الجهاز بالضغط على ...ريد كاي

 

[khaled4701]

ok جاري التجريب

 

[khaled4701]

لك هذا
Selected FlashSettings : FullFlash
Files Set for Flashing :
MCU : 9DA93F54_RM-427_30.0.011.5_prd.core.C00
PPM : D7E6DA29_RM-427_30.0.011.5_prd.rofs2.V25i
CNT : 28BCFCFF_RM427_30.0.011.5_001_001_U01.uda.fpsx
Check FlashFiles, Please, wait...
-> SWversion check skipped : UserIni mode selected

Backup enabled, Will read Certificates now...
SLx Simlock Data read ... Ok
SL2 Simlock read ... Ok
WMDRM read ... Ok
CRT308 Backup Created
Setting FlashMode
FlashMode set Ok

1st boot Ok, C0

CMT part info :
CMT ASICID : 000000010000022600010006400C192101031105
CMT EM0 ID : 00000296
CMT EM1 ID : 00000B22
CMT PUB ID : 0AA00017187C0052FF32EEB04AB4221582D318A3
CMT MODE ID : 00
CMT R_HASH : F2D76DFAFD66C7F195F278417DF05888
CMT ROM ID : 4B9B75103E691FF8

CMT : Sending 2nd loader...
Use : RAPIDOv11_2nd.fg , Rev : 0.0 Ver : 1.37.1
CMT Loader sent, Boot Ok
MCU Configuration
MCU Cfg Ok , 03
FLASHID : 004000EC , CMT , NAND
CMT Flash ID : 004000EC < SAMSUNG [SEC] => KAT00F00RA [NAND]
FLCNT : 00030000000000000000000000000000000000
FLASHID : 0000FFFF , CMT , MMC , EXT
CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok
Sending ALGO....
Use : RAPIDOv11_algo.fg , Rev : 0.0 Ver : 1.40.0
CMT Algo sent
CMT PAPUB : 76A20187051C30162EE91C77AE5E6011F5F1BA6190
Transmission mode : Dual (Ddr, TX2)

Boot Done!

CMT : Read NPC certificate...
Cert size : 2048 byte(s)
IMEI : 359308025243761
CMT : Read CCC certificate...
Cert size : 1024 byte(s)
CMT : Read HWC certificate...
Cert size : 1024 byte(s)
CMT : Read VARIANT certificate...
Cert size : 0 byte(s)
NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...
SimLock Data saved...
SimLock Key saved...
WMDRM_PD Data saved...

RPL saved : D:\best inf\BEST\Backup\Cert\359308025243761_2nd.rpl

Setting FlashMode
FlashMode set Ok

1st boot Ok, C0

CMT part info :
CMT ASICID : 000000010000022600010006400C192101031105
CMT EM0 ID : 00000296
CMT EM1 ID : 00000B22
CMT PUB ID : 0AA00017187C0052FF32EEB04AB4221582D318A3
CMT MODE ID : 00
CMT R_HASH : F2D76DFAFD66C7F195F278417DF05888
CMT ROM ID : 4B9B75103E691FF8

CMT : Sending 2nd loader...
Use : RAPIDOv11_2nd.fg , Rev : 0.0 Ver : 1.37.1
CMT Loader sent, Boot Ok
MCU Configuration
MCU Cfg Ok , 03
FLASHID : 004000EC , CMT , NAND
CMT Flash ID : 004000EC < SAMSUNG [SEC] => KAT00F00RA [NAND]
FLCNT : 00030000000000000000000000000000000000
FLASHID : 0000FFFF , CMT , MMC , EXT
CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok
Sending ALGO....
Use : RAPIDOv11_algo.fg , Rev : 0.0 Ver : 1.40.0
CMT Algo sent
CMT PAPUB : 76A20187051C30162EE91C77AE5E6011F5F1BA6190
Transmission mode : Dual (Ddr, TX2)

Boot Done!

Partitioning....
Partitioning Ok...
Transmission mode : Dual (Ddr, TX2)
Erase : Processing 9DA93F54_RM-427_30.0.011.5_prd.core.C00
Found 5 areas to erase, erase group
Asic : CMT , Sub : NAND
CMT , NAND , Area : 0x00040000 - 0x00082FFF
CMT , NAND , Area : 0x00083400 - 0x003FFFFF
CMT , NAND , Area : 0x00400000 - 0x007FFFFF
CMT , NAND , Area : 0x00800000 - 0x00D5FFFF
CMT , NAND , Area : 0x00D60000 - 0x09E5FFFF
Erasing, wait.....
CMT : Group erase Ok
Erase Partition 0x0A , CMT , NAND
CMT : Partition erase Ok
TIME : Erase time : 00:00:01
PrReq : NOR , 00
PrReq : NAND , 000300000000010000000100000000
Transmission mode : Dual (Ddr, TX2)
Write : Processing 9DA93F54_RM-427_30.0.011.5_prd.core.C00
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [SOS*UPDAPP]
CMT: Writing Hash CERT [SOS*ENO]
CMT: Writing Hash CERT [SOS*DSP0]
CMT: Writing Hash CERT [SOS*ISASW]
CMT: Writing Hash CERT [SOS+CORE]
CMT: Writing Hash CERT [SOS+ROFS1]
Total writen 372 blocks
TIME : Write time : 00:07:37

PrReq : NOR , 00
PrReq : NAND , 000300000000010000000100000000

Transmission mode : Dual (Ddr, TX2)
Erase : Processing D7E6DA29_RM-427_30.0.011.5_prd.rofs2.V25i
Found 1 areas to erase, erase group
Asic : CMT , Sub : NAND
CMT , NAND , Area : 0x06560000 - 0x0915FFFF
Erasing, wait.....
CMT : Group erase Ok
TIME : Erase time : 00:00:00
PrReq : NOR , 00
PrReq : NAND , 000300000000010000000100000000
Transmission mode : Dual (Ddr, TX2)
Write : Processing D7E6DA29_RM-427_30.0.011.5_prd.rofs2.V25i
CMT: Writing Hash CERT [SOS+ROFS2]
Total writen 133 blocks
TIME : Write time : 00:02:55

PrReq : NOR , 00
PrReq : NAND , 000300000000010000000100000000

Transmission mode : Dual (Ddr, TX2)
Erase : Processing 28BCFCFF_RM427_30.0.011.5_001_001_U01.uda.fpsx
Found 1 areas to erase, erase group
Asic : CMT , Sub : NAND
CMT , NAND , Area : 0x09E60000 - 0x0F71FFFF
Erasing, wait.....
CMT : Group erase Ok
TIME : Erase time : 00:00:00
PrReq : NOR , 00
PrReq : NAND , 000300000000010000000100000000
Transmission mode : Dual (Ddr, TX2)
Write : Processing 28BCFCFF_RM427_30.0.011.5_001_001_U01.uda.fpsx
Total writen 18 blocks
TIME : Write time : 00:00:23

PrReq : NOR , 00
PrReq : NAND , 000300000000010000000100000000


Init Service mode... Wait...

Reading Phone Info....
Connected phone - Nokia 5800 XpressMusic
Software Info: V ICPR72_09w20.5.4
23-04-10
RM-427
(c) Nokia
IMEI: 359308025243761
Ape Version: V 30.0.011.5
Product code: 0559677
Wait, when phone will be ready ...
Checking...
SimLock status : SimLock is Ok
Security status : Security Damaged!!!!!
Read Info Done!
Processing After Flash Defaults...
FullFactorySet... Ok!
UserDataDefaultsSet...OK!
ServiceDefaultsSet... Ok!
LeaveDefaultsSet... Ok!
ProductTuneSet...OK!
SwUpgradeSet...OK!
AfterFlash operations done ;D
Connect phone on selected interface...

Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info... - Ok

Read Uniq key data started...

Phone Imei: 359308025243761
Key file exists, no need to read...
Done!

 

[khaled4701]

لك هذا
Selected FlashSettings : FullFlash
Files Set for Flashing :
MCU : 9DA93F54_RM-427_30.0.011.5_prd.core.C00
PPM : D7E6DA29_RM-427_30.0.011.5_prd.rofs2.V25i
CNT : 28BCFCFF_RM427_30.0.011.5_001_001_U01.uda.fpsx
Check FlashFiles, Please, wait...
-> SWversion check skipped : UserIni mode selected

Backup enabled, Will read Certificates now...
SLx Simlock Data read ... Ok
SL2 Simlock read ... Ok
WMDRM read ... Ok
CRT308 Backup Created
Setting FlashMode
FlashMode set Ok

1st boot Ok, C0

CMT part info :
CMT ASICID : 000000010000022600010006400C192101031105
CMT EM0 ID : 00000296
CMT EM1 ID : 00000B22
CMT PUB ID : 0AA00017187C0052FF32EEB04AB4221582D318A3
CMT MODE ID : 00
CMT R_HASH : F2D76DFAFD66C7F195F278417DF05888
CMT ROM ID : 4B9B75103E691FF8

CMT : Sending 2nd loader...
Use : RAPIDOv11_2nd.fg , Rev : 0.0 Ver : 1.37.1
CMT Loader sent, Boot Ok
MCU Configuration
MCU Cfg Ok , 03
FLASHID : 004000EC , CMT , NAND
CMT Flash ID : 004000EC < SAMSUNG [SEC] => KAT00F00RA [NAND]
FLCNT : 00030000000000000000000000000000000000
FLASHID : 0000FFFF , CMT , MMC , EXT
CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok
Sending ALGO....
Use : RAPIDOv11_algo.fg , Rev : 0.0 Ver : 1.40.0
CMT Algo sent
CMT PAPUB : 76A20187051C30162EE91C77AE5E6011F5F1BA6190
Transmission mode : Dual (Ddr, TX2)

Boot Done!

CMT : Read NPC certificate...
Cert size : 2048 byte(s)
IMEI : 359308025243761
CMT : Read CCC certificate...
Cert size : 1024 byte(s)
CMT : Read HWC certificate...
Cert size : 1024 byte(s)
CMT : Read VARIANT certificate...
Cert size : 0 byte(s)
NPC Certificate saved...
CCC Certificate saved...
HWC Certificate saved...
SimLock Data saved...
SimLock Key saved...
WMDRM_PD Data saved...

RPL saved : D:\best inf\BEST\Backup\Cert\359308025243761_2nd.rpl

Setting FlashMode
FlashMode set Ok

1st boot Ok, C0

CMT part info :
CMT ASICID : 000000010000022600010006400C192101031105
CMT EM0 ID : 00000296
CMT EM1 ID : 00000B22
CMT PUB ID : 0AA00017187C0052FF32EEB04AB4221582D318A3
CMT MODE ID : 00
CMT R_HASH : F2D76DFAFD66C7F195F278417DF05888
CMT ROM ID : 4B9B75103E691FF8

CMT : Sending 2nd loader...
Use : RAPIDOv11_2nd.fg , Rev : 0.0 Ver : 1.37.1
CMT Loader sent, Boot Ok
MCU Configuration
MCU Cfg Ok , 03
FLASHID : 004000EC , CMT , NAND
CMT Flash ID : 004000EC < SAMSUNG [SEC] => KAT00F00RA [NAND]
FLCNT : 00030000000000000000000000000000000000
FLASHID : 0000FFFF , CMT , MMC , EXT
CMT Flash ID : 0000FFFF < Bad Flash Type , if MMC - It Ok
Sending ALGO....
Use : RAPIDOv11_algo.fg , Rev : 0.0 Ver : 1.40.0
CMT Algo sent
CMT PAPUB : 76A20187051C30162EE91C77AE5E6011F5F1BA6190
Transmission mode : Dual (Ddr, TX2)

Boot Done!

Partitioning....
Partitioning Ok...
Transmission mode : Dual (Ddr, TX2)
Erase : Processing 9DA93F54_RM-427_30.0.011.5_prd.core.C00
Found 5 areas to erase, erase group
Asic : CMT , Sub : NAND
CMT , NAND , Area : 0x00040000 - 0x00082FFF
CMT , NAND , Area : 0x00083400 - 0x003FFFFF
CMT , NAND , Area : 0x00400000 - 0x007FFFFF
CMT , NAND , Area : 0x00800000 - 0x00D5FFFF
CMT , NAND , Area : 0x00D60000 - 0x09E5FFFF
Erasing, wait.....
CMT : Group erase Ok
Erase Partition 0x0A , CMT , NAND
CMT : Partition erase Ok
TIME : Erase time : 00:00:01
PrReq : NOR , 00
PrReq : NAND , 000300000000010000000100000000
Transmission mode : Dual (Ddr, TX2)
Write : Processing 9DA93F54_RM-427_30.0.011.5_prd.core.C00
CMT: Writing Hash CERT [ADA]
CMT: Writing Hash CERT [KEYS]
CMT: Writing Hash CERT [PRIMAPP]
CMT: Writing Hash CERT [RAP3NAND]
CMT: Writing Hash CERT [PASUBTOC]
CMT: Writing Hash CERT [PAPUBKEYS]
CMT: Writing Hash CERT [SOS*UPDAPP]
CMT: Writing Hash CERT [SOS*ENO]
CMT: Writing Hash CERT [SOS*DSP0]
CMT: Writing Hash CERT [SOS*ISASW]
CMT: Writing Hash CERT [SOS+CORE]
CMT: Writing Hash CERT [SOS+ROFS1]
Total writen 372 blocks
TIME : Write time : 00:07:37

PrReq : NOR , 00
PrReq : NAND , 000300000000010000000100000000

Transmission mode : Dual (Ddr, TX2)
Erase : Processing D7E6DA29_RM-427_30.0.011.5_prd.rofs2.V25i
Found 1 areas to erase, erase group
Asic : CMT , Sub : NAND
CMT , NAND , Area : 0x06560000 - 0x0915FFFF
Erasing, wait.....
CMT : Group erase Ok
TIME : Erase time : 00:00:00
PrReq : NOR , 00
PrReq : NAND , 000300000000010000000100000000
Transmission mode : Dual (Ddr, TX2)
Write : Processing D7E6DA29_RM-427_30.0.011.5_prd.rofs2.V25i
CMT: Writing Hash CERT [SOS+ROFS2]
Total writen 133 blocks
TIME : Write time : 00:02:55

PrReq : NOR , 00
PrReq : NAND , 000300000000010000000100000000

Transmission mode : Dual (Ddr, TX2)
Erase : Processing 28BCFCFF_RM427_30.0.011.5_001_001_U01.uda.fpsx
Found 1 areas to erase, erase group
Asic : CMT , Sub : NAND
CMT , NAND , Area : 0x09E60000 - 0x0F71FFFF
Erasing, wait.....
CMT : Group erase Ok
TIME : Erase time : 00:00:00
PrReq : NOR , 00
PrReq : NAND , 000300000000010000000100000000
Transmission mode : Dual (Ddr, TX2)
Write : Processing 28BCFCFF_RM427_30.0.011.5_001_001_U01.uda.fpsx
Total writen 18 blocks
TIME : Write time : 00:00:23

PrReq : NOR , 00
PrReq : NAND , 000300000000010000000100000000


Init Service mode... Wait...

Reading Phone Info....
Connected phone - Nokia 5800 XpressMusic
Software Info: V ICPR72_09w20.5.4
23-04-10
RM-427
(c) Nokia
IMEI: 359308025243761
Ape Version: V 30.0.011.5
Product code: 0559677
Wait, when phone will be ready ...
Checking...
SimLock status : SimLock is Ok
Security status : Security Damaged!!!!!
Read Info Done!
Processing After Flash Defaults...
FullFactorySet... Ok!
UserDataDefaultsSet...OK!
ServiceDefaultsSet... Ok!
LeaveDefaultsSet... Ok!
ProductTuneSet...OK!
SwUpgradeSet...OK!
AfterFlash operations done ;D
Connect phone on selected interface...

Connect phone on selected interface...

Phone found!
Series 60 Device detected!
read info... - Ok

Read Uniq key data started...

Phone Imei: 359308025243761
Key file exists, no need to read...
Done!