صفحة 5 من 7 الأولىالأولى ... 34567 الأخيرةالأخيرة
النتائج 41 إلى 50 من 62

الموضوع: فلاشات MTK ANDROID مسحوبة ب InfinityBox CM2MTK

  1. #41
    cheddihouse غير متواجد حالياً
    :: Super User ::

    تاريخ التسجيل
    Jul 2013
    الدولة
    merouana batna
    المشاركات
    847
    معدل تقييم المستوى
    59
    شكراً
    716
    تم شكره
    5,254

    افتراضي

    فلاشة ZTE Blade L2

    فلاشات MTK ANDROID مسحوبة ب InfinityBox CM2MTK


    معلومات الفلاشة


    كود:
    Operation : Check / Read Info [ v1.38 ]
    
    1. Power Off Phone , Remove battery , Insert back
    2. Insert USB cable. In some cases require hold BootKey
    
    Wait for phone...
    Phone found! [ 119 ]
    Sync...
    Inital regs read done
    Boot Info : 
    BB_CPU_ID : 6582
    BB_CPU_HW : CA01
    BB_CPU_SW : 8A00
    BB_CPU_SB : 0001
    BB_CPU_NM : [MediaTek] MT6582_S00
    Processing BROM stage
    SecCfgVal : 0x00000000
    BromVersion : 0xFF
    BLVersion : 0x01
    Preloader Status : Alive
    Processing DA stage
    DA Select done , sending 
    DA Ver : MTK_AllInOne_DA_v7.1533.03
    NAND_ID : 00000000000000000000000000000000
    eMMC_ID : 90014A4834473164048603A4F75CA129
    DA Stat : v4.2 on BBID : 0x87
    DA Sent. Configure setting now ... 
    DA started successuflly
    eMMC FlashIC initialized
    [eMMC] : FLASH_VEN : 0090 , OEM : 014A
    [eMMC] : FLASH_INF : [HYNIX] , d1G4
    [eMMC] : FLASH_CID : 90014A4834473164048603A4F75CA129
    [eMMC] : FLASH_EXT : 0x00200000 , 0x00200000 , 0x00200000
    [eMMC] : FLASH_LEN : 0x00000000E7000000
    [eMMC] : FLASH_UCP : 3696 MiB
    INT RAM    : 0x00020000
    EXT RAM    : 0x40000000
    BOOT TYPE  : EMMC_FLASH_BOOT
    SOC VERIFY : C1
    Boot Ok!
    
    [AP] : Initial info read Ok!
    
    Brand     : ZTE
    ProdName  : P182A10
    ProdModel : ZTE Blade L2
    Device    : P182A10
    AndroidVer: 4.4.2
    MTKxCPU   : MT6582
    MTKxPRJ   : ALPS.KK1.MP1.V2.10
    
    MODEM : 
    BaseBand  : MT6582_S00_MOLY_WR8_W1315_MD_WG_MP_V34_F1_1_wg_n
    
    EXTRA : 
    LCD [0] : otm8018b_dsi_vdo
    LCD [1] : ili9806e_fwvga_dsi_cmd_txd
    LCD Res : 854x480
    TOUCH [0] : ft6x06
    CAM [0] : a5141qiutai_mipi_raw
    CAM [1] : a5141sijichun_mipi_raw
    CAM [2] : imx111_mipi_raw_mcnex
    CAM [3] : imx111_mipi_raw
    CAM [4] : imx219_mipi_raw
    CAM [5] : imx219_mipi_raw_mcnex
    CAM [6] : sp0a19_yuv
    MODEM : P182A10_EUR_RM850
    LOCALE : fr_FR en_US ar_EG es_ES zh_CN
    
    Done!
    Elapsed: 00:00:13


    الروابط تظهر للاعضاء فقط


    password;dzgsm


  2. #42
    cheddihouse غير متواجد حالياً
    :: Super User ::

    تاريخ التسجيل
    Jul 2013
    الدولة
    merouana batna
    المشاركات
    847
    معدل تقييم المستوى
    59
    شكراً
    716
    تم شكره
    5,254

    افتراضي

    فلاشة ZTE Blade C2 Plus

    فلاشات MTK ANDROID مسحوبة ب InfinityBox CM2MTK

    معلومات الفلاشة

    كود:
    Operation : Read Flash [ v1.34 ]
    
    1. Power Off Phone , Remove battery , Insert back
    2. Insert USB cable. In some cases require hold BootKey
    
    Wait for phone...
    Phone found! [ 50 ]
    Sync...
    Inital regs read done
    Boot Info : 
    BB_CPU_ID : 6572
    BB_CPU_HW : CA01
    BB_CPU_SW : 8A00
    BB_CPU_SB : 0000
    BB_CPU_NM : [MediaTek] MT6572_S00
    Processing BROM stage
    BLVersion : 0x01
    SecCfgVal : 0x00000000
    BromVersion : 0xFF
    BLVersion : 0x01
    Preloader Status : Alive
    Processing DA stage
    DA Select done , sending 
    DA Ver : MTK_AllInOne_DA_v7.1533.03
    NAND_ID : 00000000000000000000000000000000
    eMMC_ID : 45010053454D30344728665E623C718F
    DA Stat : v4.2 on BBID : 0x88
    DA Sent. Configure setting now ... 
    DA started successuflly
    eMMC FlashIC initialized
    [eMMC] : FLASH_VEN : 0045 , OEM : 0100
    [eMMC] : FLASH_INF : G40ME
    [eMMC] : FLASH_CID : 45010053454D30344728665E623C718F
    [eMMC] : FLASH_EXT : 00200000/00200000
    [eMMC] : FLASH_LEN : 0x00000000EC000000
    INT RAM    : 0x00020000
    EXT RAM    : 0x20000000
    BOOT TYPE  : EMMC_FLASH_BOOT
    SOC VERIFY : C1
    Boot Ok!
    
    Reading Flash Conent now ... 
    
    Brand     : ZTE
    ProdName  : P172B20
    ProdModel : ZTE Blade C2 Plus
    Device    : P172B20
    AndroidVer: 4.4.2
    MTKxCPU   : MT6572
    MTKxPRJ   : ALPS.KK1.MP6.V1
    
    [Read Ok] : preloader_p172b20.bin
    [Read Ok] : MBR
    [Read Ok] : EBR1
    [Read Ok] : lk.bin
    [Read Ok] : boot.img
    [Read Ok] : recovery.img
    [Read Ok] : secro.img
    [Read Ok] : logo.bin
    [Read Ok] : system.img
    [Read Ok] : cache.img
    [Read Ok] : userdata.img
    [Read Ok] : fat.img
    
    [ScatCFG] : MT6572 / V1.1.1 / p172b20 / EMMC
    FW Size : 933 MiB
    Scatter saved to : C:\InfinityBox\CM2MTK\Flash\MT6572__ZTE__ZTE Blade C2 Plus__P172B20__4.4.2__ALPS.KK1.MP6.V1\
    
    All done!


    الروابط تظهر للاعضاء فقط


    password;dzgsm

  3. 17 أعضاء قالوا شكراً لـ cheddihouse على المشاركة المفيدة:


  4. #43
    cheddihouse غير متواجد حالياً
    :: Super User ::

    تاريخ التسجيل
    Jul 2013
    الدولة
    merouana batna
    المشاركات
    847
    معدل تقييم المستوى
    59
    شكراً
    716
    تم شكره
    5,254

    افتراضي

    فلاشة HTC M9


    فلاشات MTK ANDROID مسحوبة ب InfinityBox CM2MTK

    معلومات الفلاشة

    كود:
    Operation : Check / Read Info [ v1.38 ]
    
    1. Power Off Phone , Remove battery , Insert back
    2. Insert USB cable. In some cases require hold BootKey
    
    Wait for phone...
    Phone found! [ 6 ]
    Sync...
    Inital regs read done
    Boot Info : 
    BB_CPU_ID : 6572
    BB_CPU_HW : CA01
    BB_CPU_SW : 8A00
    BB_CPU_SB : 0000
    BB_CPU_NM : [MediaTek] MT6572_S00
    Processing BROM stage
    BLVersion : 0x01
    SecCfgVal : 0x00000000
    BromVersion : 0xFF
    BLVersion : 0x01
    Preloader Status : Alive
    Processing DA stage
    DA Select done , sending 
    DA Ver : MTK_AllInOne_DA_v7.1533.03
    NAND_ID : 00000000000000000000000000000000
    eMMC_ID : 90014A4834473164048600AF0C1430C3
    DA Stat : v4.2 on BBID : 0x88
    DA Sent. Configure setting now ... 
    DA started successuflly
    eMMC FlashIC initialized
    [eMMC] : FLASH_VEN : 0090 , OEM : 014A
    [eMMC] : FLASH_INF : [HYNIX] , d1G4
    [eMMC] : FLASH_CID : 90014A4834473164048600AF0C1430C3
    [eMMC] : FLASH_EXT : 0x00200000 , 0x00200000 , 0x00200000
    [eMMC] : FLASH_LEN : 0x00000000E7000000
    [eMMC] : FLASH_UCP : 3696 MiB
    INT RAM    : 0x00020000
    EXT RAM    : 0x20000000
    BOOT TYPE  : EMMC_FLASH_BOOT
    SOC VERIFY : C1
    Boot Ok!
    
    [AP] : Initial info read Ok!
    
    Brand     : lmkj
    ProdName  : M9
    ProdModel : M9
    Device    : M9
    AndroidVer: 5.0.2
    MTKxCPU   : MT6572
    MTKxPRJ   : ALPS.KK1.MP7.V1
    
    MODEM : 
    BaseBand  : MT6572_S00_MOLY_WR8_W1315_MD_WG_MP_V43_1_wg_n
    
    EXTRA : 
    LCD [0] : jd9261_qhd_dsi_vdo_dhd_h01_guangtai
    LCD [1] : ili9807_qhd_dsi_vdo_dhd_h01_ytc
    LCD [2] : ili9806e_wvga_dsi_vdo_dhd_h01
    LCD [3] : ili9806g_fwvga_dsi_cmd_dhd_h01_ytc
    LCD [4] : hx8389c_qhd_dsi_vdo_dhd_h01_hanlong
    LCD [5] : otm9605a_qhd_dsi_vdo_dhd_h01
    LCD Res : 960x540
    TOUCH [0] : focaltech
    CAM [0] : gc0310mipi_yuv
    CAM [1] : gc2145mipi_yuv
    CAM [2] : ov5645_mipi_yuv
    CAM [3] : s5k4ecgx_mipi_yuv
    MODEM : m10_v10_b15
    LOCALE : es_ES pt_PT en_US zh_CN zh_TW ru_RU pt_BR fr_FR de_DE tr_TR it_IT in_ID ms_MY vi_VN ar_EG ar_IL  th_TH   nl_NL el_GR hu_HU tl_PH ro_RO cs_CZ iw_IL my_MM km_KH ko_KR pl_PL bg_BG hr_HR lv_LV lt_LT sk_SK uk_UA de_AT da_DK fi_FI nb_NO sv_SE en_GB fa_AF fa_IR
    
    Done!
    Elapsed: 00:00:15
    Reconnect Power/Cable!
    
    Finish at : [07/12/2015 / 16:42:11]


    الروابط تظهر للاعضاء فقط

  5. 16 أعضاء قالوا شكراً لـ cheddihouse على المشاركة المفيدة:


  6. #44
    cheddihouse غير متواجد حالياً
    :: Super User ::

    تاريخ التسجيل
    Jul 2013
    الدولة
    merouana batna
    المشاركات
    847
    معدل تقييم المستوى
    59
    شكراً
    716
    تم شكره
    5,254

    افتراضي

    فلاشة gt-i9060i

    فلاشات MTK ANDROID مسحوبة ب InfinityBox CM2MTK

    معلومات الفلاشة

    كود:
    Operation : Check / Read Info [ v1.32 ]
    
    1. Power Off Phone , Remove battery , Insert back
    2. Insert USB cable. In some cases require hold BootKey
    
    Wait for phone...
    Phone found! [ 6 ]
    Sync...
    Inital regs read done
    Boot Info : 
    BB_CPU_ID : 6572
    BB_CPU_HW : CA01
    BB_CPU_SW : 8A00
    BB_CPU_SB : 0000
    BB_CPU_NM : [MediaTek] MT6572_S00
    Processing BROM stage
    BLVersion : 0x01
    SecCfgVal : 0x00000000
    BromVersion : 0xFF
    BLVersion : 0x01
    Preloader Status : Alive
    Processing DA stage
    DA Select done , sending 
    DA Ver : MTK_AllInOne_DA_v7.1533.03
    NAND_ID : 00000000000000000000000000000000
    eMMC_ID : 90014A4834473164040504A1FA4A61F3
    DA Stat : v4.2 on BBID : 0x88
    DA Sent. Configure setting now ... 
    DA started successuflly
    eMMC FlashIC initialized
    [eMMC] : FLASH_VEN : 0090 , OEM : 014A
    [eMMC] : FLASH_INF : d1G4
    [eMMC] : FLASH_CID : 90014A4834473164040504A1FA4A61F3
    [eMMC] : FLASH_EXT : 00400000/00400000
    [eMMC] : FLASH_LEN : 0x00000000E9000000
    INT RAM    : 0x00020000
    EXT RAM    : 0x20000000
    BOOT TYPE  : EMMC_FLASH_BOOT
    SOC VERIFY : C1
    Boot Ok!
    
    [AP] : Initial info read Ok!
    
    Brand     : samsung
    ProdName  : GT-I9060I
    ProdModel : GT-I9060I
    Device    : GT-I9060I
    AndroidVer: 4.4.4
    MTKxCPU   : MT6572
    MTKxPRJ   : ALPS.JB3.MP.V1
    
    EXTRA : 
    LCD [0] : sc7798_dsi_vdo
    LCD [1] : hx8379c_dsi_vdo
    LCD [2] : rm68172_dsi_vdo
    LCD [3] : ili9806e_mipi_vdo
    LCD [4] : hx8369b_dsi_vdo
    LCD [5] : nt35510_dsi_cmd_6572_fwvga
    LCD [6] : otm8009a_fwvga_dsi_cmd
    LCD [7] : #nt35510_dsi
    LCD [8] : hx8369b_dsi_vdo
    LCD Res : 800x480
    TOUCH [0] : ft5206
    CAM [0] : gc2035_yuv
    CAM [1] : gc0329_yuv
    CAM [2] :  gc0328_yuv s5k4ecgx_mipi_yuv gc2145mipi_yuv  
    CAM [3] : s5k4ecgx_yuv
    MODEM : mbk72_wet_jb3_hspa
    LOCALE : en_US es_ES ru_RU pt_BR fr_FR de_DE tr_TR it_IT in_ID ms_MY vi_VN ar_EG fa_IR th_TH  pt_PT nl_NL el_GR hu_HU tl_PH ur_PK ro_RO cs_CZ iw_IL pl_PL my_MM km_KH hdpi -sw600dp -sw720dp
    
    Done!
    Elapsed: 00:00:21
    Reconnect Power/Cable!


    الروابط تظهر للاعضاء فقط
    password;dzgsm

  7. 17 أعضاء قالوا شكراً لـ cheddihouse على المشاركة المفيدة:


  8. #45
    cheddihouse غير متواجد حالياً
    :: Super User ::

    تاريخ التسجيل
    Jul 2013
    الدولة
    merouana batna
    المشاركات
    847
    معدل تقييم المستوى
    59
    شكراً
    716
    تم شكره
    5,254

    افتراضي

    فلاشة YEZZ Andy 5EI



    فلاشات MTK ANDROID مسحوبة ب InfinityBox CM2MTK

    معلومات الفلاشة

    كود:
    Operation : Check / Read Info [ v1.38 ]
    
    1. Power Off Phone , Remove battery , Insert back
    2. Insert USB cable. In some cases require hold BootKey
    
    Wait for phone...
    Phone found! [ 12 ]
    Sync...
    Inital regs read done
    Boot Info : 
    BB_CPU_ID : 6572
    BB_CPU_HW : CA01
    BB_CPU_SW : 8A00
    BB_CPU_SB : 0000
    BB_CPU_NM : [MediaTek] MT6572_S00
    Processing BROM stage
    BLVersion : 0x01
    SecCfgVal : 0x00000000
    BromVersion : 0xFF
    BLVersion : 0x01
    Preloader Status : Alive
    Processing DA stage
    DA Select done , sending 
    DA Ver : MTK_AllInOne_DA_v7.1533.03
    NAND_ID : 00000000000000000000000000000000
    eMMC_ID : 45010053454D3034473A349B99559119
    DA Stat : v4.2 on BBID : 0x88
    DA Sent. Configure setting now ... 
    DA started successuflly
    eMMC FlashIC initialized
    [eMMC] : FLASH_VEN : 0045 , OEM : 0100
    [eMMC] : FLASH_INF : [SANDISK] , G40ME
    [eMMC] : FLASH_CID : 45010053454D3034473A349B99559119
    [eMMC] : FLASH_EXT : 0x00200000 , 0x00200000 , 0x00200000
    [eMMC] : FLASH_LEN : 0x00000000EC000000
    [eMMC] : FLASH_UCP : 3776 MiB
    INT RAM    : 0x00020000
    EXT RAM    : 0x20000000
    BOOT TYPE  : EMMC_FLASH_BOOT
    SOC VERIFY : C1
    Boot Ok!
    
    [AP] : Initial info read Ok!
    
    Brand     : YEZZ
    ProdName  : Andy_5EI
    ProdModel : Andy_5EI
    Device    : Andy_5EI
    AndroidVer: 4.4.2
    MTKxCPU   : MT6572
    MTKxPRJ   : YEZZ_ANDY_5EI_FR_4.4_B047_V009_20141107
    
    MODEM : 
    BaseBand  : MT6572_S00_MOLY_WR8_W1315_MD_WG_MP_V36_P1_1_wg_n
    
    EXTRA : 
    LCD [0] : g308_zx_fwvga_zgd
    LCD [1] : rm68172_cpt50_huashu_fwvga
    LCD Res : 854x480
    TOUCH [0] : gt9xx_g308_zx_ystq
    TOUCH [1] : gsl968e_g308_zx_h18##gsl960_g308_rsgd_a1
    TOUCH [2] : gt9xx_g308_zx_ystq
    CAM [0] : hi258_mipi_yuv_g308_zx_h18
    CAM [1] : hi704_yuv_g308_zx_h18
    CAM [2] : gc0329_yuv_g307_zx_s18
    CAM [3] : gc2155_dvp_yuv_g307_s18_ry
    CAM [4] : gc2145mipi_yuv_g308_tongju
    MODEM : RATECH72_WE_72_RLK_KK_HSPA_G308_ALL_9002100_CO_CLOCK_DOWNLINK
    LOCALE : fr_FR in_ID en_US es_ES zh_CN zh_TW ru_RU pt_BR de_DE tr_TR it_IT ms_MY vi_VN ar_EG  th_TH  pt_PT   nl_NL el_GR hu_HU tl_PH ro_RO cs_CZ iw_IL my_MM km_KH ko_KR pl_PL es_US bg_BG hr_HR lv_LV lt_LT sk_SK uk_UA de_AT da_DK fi_FI nb_NO sv_SE en_GB
    
    Done!
    Elapsed: 00:00:12
    Reconnect Power/Cable!


    الروابط تظهر للاعضاء فقط


    password;dzgsm

  9. 10 أعضاء قالوا شكراً لـ cheddihouse على المشاركة المفيدة:


  10. #46
    cheddihouse غير متواجد حالياً
    :: Super User ::

    تاريخ التسجيل
    Jul 2013
    الدولة
    merouana batna
    المشاركات
    847
    معدل تقييم المستوى
    59
    شكراً
    716
    تم شكره
    5,254

    افتراضي

    حصريا فلاشة تاب SuperTab.R10-3G

    فلاشات MTK ANDROID مسحوبة ب InfinityBox CM2MTK

    معلومات الفلاشة

    كود:
    Start  at : [06/02/2016 / 11:59:28]
    Operation : Check / Read Info [ v1.40 ]
    
    1. Power Off Phone , Remove battery , Insert back
    2. Insert USB cable. In some cases require hold BootKey
    
    Wait for phone...
    Phone found! [ 225 ]
    Sync...
    Inital regs read done
    Boot Info : 
    BB_CPU_ID : 6582
    BB_CPU_HW : CB00
    BB_CPU_SW : 8A00
    BB_CPU_SB : 0001
    BB_CPU_NM : [MediaTek] MT6582_S00
    Processing BROM stage
    SecCfgVal : 0x00000000
    BromVersion : 0xFF
    BLVersion : 0x01
    Preloader Status : Alive
    Processing DA stage
    DA Select done , sending 
    DA Ver : MTK_AllInOne_DA_v5.1540.01.01
    NAND_ID : 00000000000000000000000000000000
    eMMC_ID : 8801034E436172642023DB064729B19F
    DA Stat : v4.2 on BBID : 0x87
    DA Sent. Configure setting now ... 
    DA started successuflly
    eMMC FlashIC initialized
    [eMMC] : FLASH_VEN : 0088 , OEM : 0103
    [eMMC] : FLASH_INF : [FORESEE] , draC
    [eMMC] : FLASH_CID : 8801034E436172642023DB064729B19F
    [eMMC] : FLASH_EXT : 0x00200000 , 0x00200000 , 0x00020000
    [eMMC] : FLASH_LEN : 0x00000001CE100000
    [eMMC] : FLASH_UCP : 7393 MiB
    INT RAM    : 0x00020000
    EXT RAM    : 0x40000000
    BOOT TYPE  : EMMC_FLASH_BOOT
    SOC VERIFY : C1
    Boot Ok!
    
    [AP] : Initial info read Ok!
    
    Brand     : SuperTab
    ProdName  : MZ101
    ProdModel : SuperTab.R10-3G
    Device    : MZ101
    AndroidVer: 4.4.2
    MTKxCPU   : MT6582
    MTKxPRJ   : ALPS.KK1.MP1.V2.11
    
    MODEM : 
    BaseBand  : MT6582_S00_MOLY_WR8_W1315_MD_WG_MP_V35_1_wg_n
    
    EXTRA : 
    LCD [0] : hx8667g_hd720_dsi_vdo
    LCD Res : 800x1280
    TOUCH [0] : GSL3676
    CAM [0] : ov8858_mipi_raw
    CAM [1] : ov5693_mipi_raw
    CAM [2] : ov5648_mipi_raw
    CAM [3] : ov5647_mipi_raw
    CAM [4] : hm5040_mipi_raw
    CAM [5] : gc5004_mipi_raw
    CAM [6] : gc5004_raw
    CAM [7] : gc2235_mipi_raw
    CAM [8] : gc2355_mipi_raw
    CAM [9] : gc2235_raw
    CAM [10] : gc2355_raw
    CAM [11] : gc0328_yuv
    CAM [12] : gc0308_yuv
    CAM [13] : gc0329_yuv
    MODEM : elink82_mz_tb_kk_hspa_W1
    LOCALE : fr_FR en_US af_ZA am_ET ar_EG ar_IL bg_BG bn_IN ca_ES cs_CZ da_DK de_AT de_CH de_DE de_LI el_GR en_AU en_CA en_GB en_IE en_IN en_NZ en_SG en_ZA es_ES fa_IR fi_FI fr_BE fr_CA fr_CH hi_IN hr_HR hu_HU in_ID it_CH it_IT iw_IL ja_JP km_KH ko_KR lt_LT lv_LV ms_MY my_MM nb_NO nl_BE nl_NL pl_PL pt_BR pt_PT rm_CH ro_RO ru_RU sk_SK sl_SI sr_RS sv_SE sw_TZ th_TH tl_PH tr_TR uk_UA ur_PK vi_VN zh_CN zh_TW zu_ZA
    
    Done!
    Elapsed: 00:00:08
    Reconnect Power/Cable!
    
    
    الروابط تظهر للاعضاء فقط

    الروابط تظهر للاعضاء فقط

    password;dzgsm

  11. 18 أعضاء قالوا شكراً لـ cheddihouse على المشاركة المفيدة:


  12. #47
    cheddihouse غير متواجد حالياً
    :: Super User ::

    تاريخ التسجيل
    Jul 2013
    الدولة
    merouana batna
    المشاركات
    847
    معدل تقييم المستوى
    59
    شكراً
    716
    تم شكره
    5,254

    افتراضي

    حصريا فلاشة robuste r1 one فقط على منتدى DZGSM


    فلاشات MTK ANDROID مسحوبة ب InfinityBox CM2MTK


    معلومات الفلاشة

    كود:
    1. Power Off Phone , Remove battery , Insert back
    2. Insert USB cable. In some cases require hold BootKey
    
    Wait for phone...
    Phone found! [ 225 ]
    Sync...
    Inital regs read done
    Boot Info : 
    BB_CPU_ID : 6572
    BB_CPU_HW : CA01
    BB_CPU_SW : 8A00
    BB_CPU_SB : 0000
    BB_CPU_NM : [MediaTek] MT6572_S00
    Processing BROM stage
    BLVersion : 0x01
    SecCfgVal : 0x00000000
    BromVersion : 0xFF
    BLVersion : 0x01
    Preloader Status : Alive
    Processing DA stage
    DA Select done , sending 
    DA Ver : MTK_AllInOne_DA_v5.1540.01.01
    NAND_ID : 00000000000000000000000000000000
    eMMC_ID : 15010046355835434201CFECC4E7421B
    DA Stat : v4.2 on BBID : 0x88
    DA Sent. Configure setting now ... 
    DA started successuflly
    eMMC FlashIC initialized
    [eMMC] : FLASH_VEN : 0015 , OEM : 0100
    [eMMC] : FLASH_INF : [SAMSUNG] , BC5X5
    [eMMC] : FLASH_CID : 15010046355835434201CFECC4E7421B
    [eMMC] : FLASH_EXT : 0x00400000 , 0x00400000 , 0x00080000
    [eMMC] : FLASH_LEN : 0x00000000E9000000
    [eMMC] : FLASH_UCP : 3728 MiB
    INT RAM    : 0x00020000
    EXT RAM    : 0x20000000
    BOOT TYPE  : EMMC_FLASH_BOOT
    SOC VERIFY : C1
    Boot Ok!
    
    [AP] : Initial info read Ok!
    
    Brand     : ROBUSTE
    ProdName  : u961ce
    ProdModel : R1 ONE
    Device    : u961ce
    AndroidVer: 4.4.2
    MTKxCPU   : MT6572
    MTKxPRJ   : W1095.4.01.03.DZ00
    
    MODEM : 
    BaseBand  : MT6572_S00_MOLY_WR8_W1315_MD_WG_MP_V43_F1_P1_1_wg_n
    
    EXTRA : 
    LCD [0] : ili9806e_fwvga_dsi_vdo_trust_hs
    LCD [1] : ili9806e_fwvga_dsi_vdo_dijing_hs
    LCD Res : 854x480
    TOUCH [0] : ft5206
    CAM [0] : ov5645_mipi_yuv
    CAM [1] : sp0a20_mipi_yuv
    MODEM : hisense72_w_kk_hspa_u961ce
    LOCALE : fr_FR en_US de_DE it_IT es_ES pt_PT ru_RU ar_EG zh_CN hi_IN fa_IR nl_NL
    
    Done!
    Elapsed: 00:00:09
    Reconnect Power/Cable!


    الروابط تظهر للاعضاء فقط


    password // dzgsm


  13. #48
    cheddihouse غير متواجد حالياً
    :: Super User ::

    تاريخ التسجيل
    Jul 2013
    الدولة
    merouana batna
    المشاركات
    847
    معدل تقييم المستوى
    59
    شكراً
    716
    تم شكره
    5,254

    افتراضي

    حصريا فلاشة كوندور A9 lollipop 5.1 NEW LOGO ONLY

    فلاشات MTK ANDROID مسحوبة ب InfinityBox CM2MTK


    معلومات الفلاشة

    كود:
    peration : Read Flash [ v1.40 ]
    
    1. Power Off Phone , Remove battery , Insert back
    2. Insert USB cable. In some cases require hold BootKey
    
    Wait for phone...
    Phone found! [ 6 ]
    Sync...
    Inital regs read done
    Boot Info : 
    BB_CPU_ID : 6592
    BB_CPU_HW : CA00
    BB_CPU_SW : 8A00
    BB_CPU_SB : 0000
    BB_CPU_NM : [MediaTek] MT6592_S00
    Processing BROM stage
    BLVersion : 0x01
    SecCfgVal : 0x00000000
    BromVersion : 0xFF
    BLVersion : 0x01
    Preloader Status : Alive
    Processing DA stage
    DA Select done , sending 
    DA Ver : MTK_AllInOne_DA_v5.1540.01.01
    NAND_ID : 00000000000000000000000000000000
    eMMC_ID : 150100523832314D420078D5D0935299
    DA Stat : v4.2 on BBID : 0x8A
    DA Sent. Configure setting now ... 
    DA started successuflly
    eMMC FlashIC initialized
    [eMMC] : FLASH_VEN : 0015 , OEM : 0100
    [eMMC] : FLASH_INF : [SAMSUNG] , BM128
    [eMMC] : FLASH_CID : 150100523832314D420078D5D0935299
    [eMMC] : FLASH_EXT : 0x00400000 , 0x00400000 , 0x00400000
    [eMMC] : FLASH_LEN : 0x00000003A3E00000
    [eMMC] : FLASH_UCP : 14910 MiB
    INT RAM    : 0x00020000
    EXT RAM    : 0x80000000
    BOOT TYPE  : EMMC_FLASH_BOOT
    SOC VERIFY : C1
    Boot Ok!
    
    Reading Flash Conent now ... 
    
    Brand     : condor
    ProdName  : condor
    ProdModel : PGN-507
    Device    : condor
    AndroidVer: 5.1
    MTKxCPU   : MT6592
    MTKxPRJ   : WBW5707AC_0401_T9131
    
    [Read Ok] : preloader_gionee6592_wet_l.bin
    [Read Ok] : MBR
    [Read Ok] : EBR1
    [Read Ok] : lk.bin
    [Read Ok] : boot.img
    [Read Ok] : recovery.img
    [Read Ok] : secro.img
    [Read Ok] : logo.bin
    [Read Ok] : EBR2
    [Read Ok] : spdata.img
    [Read Ok] : system.img
    [Read Ok] : cache.img
    [Read Ok] : userdata.img
    [Read Ok] : fat.img
    
    [ScatCFG] : MT6592 / V1.1.2 / gionee6592_wet_l / EMMC
    FW Size : 1383 MiB
    Scatter saved to : K:\A9 NEW LOGO\MT6592__condor__PGN-507__condor__5.1__WBW5707AC_0401_T9131\
    
    All done!


    الروابط تظهر للاعضاء فقط



    PASSWORD//dzgsm

  14. 8 أعضاء قالوا شكراً لـ cheddihouse على المشاركة المفيدة:


  15. #49
    zinnou غير متواجد حالياً
    عضو جديد
    تاريخ التسجيل
    Aug 2012
    المشاركات
    33
    معدل تقييم المستوى
    0
    شكراً
    69
    تم شكره
    52

    افتراضي فلاشة lg g3 mtk6572

    lg g3 mtk6572

    فلاشات MTK ANDROID مسحوبة ب InfinityBox CM2MTK



    معلومات الفلاشة
    Operation : Check / Read Info [ v1.44 ]

    1. Power Off Phone , Remove battery , Insert back
    2. Insert USB cable. In some cases require hold BootKey

    Wait for phone...
    Phone found! [ 150 ]
    Sync...
    Inital Boot Ok!
    BB_CPU_PID : 6572
    BB_CPU_NME : [MediaTek] MT6572_S00
    BB_CPU_EXT : 0xCA01 , 0x8A00 , 0x0000
    Processing BROM stage
    Settings for BROM configured!
    SecCfgVal : 0x00000000
    BromVer : 0x00FF
    BLVersion : 0x0001
    PreLoader : Active [ Boot with PL ]
    BootLdrSS : NORMAL with SPRELOADER
    Processing DA stage
    DA Select done, will use MTK_AllInOne_DA_v5.1552.01.01
    Sending and initialize DA ...
    Running DA ver.4.2 on BBID : 0x88
    NAND Flash : NOT INSTALLED
    eMMC Flash : 3701FF454D43303447103500FF7491FF
    Initialize Memory ...
    DRAM already initialized by Preloader
    eMMC FlashIC initialized
    [eMMC] : FLASH_VEN : 0x37 , OEM : 01FF
    [eMMC] : FLASH_INF : [NOT_IN_BASE] , G40CM
    [eMMC] : FLASH_CID : 3701FF454D43303447103500FF7491FF
    [eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
    [eMMC] : FLASH_LEN : 0x00000000E9000000
    [eMMC] : FLASH_UCP : 3728 MiB [eMMC 4 GiB]
    DEV RID : 41480561665C659D8A7BE24A3D5F279D
    INT RAM : 0x00020000
    EXT RAM : 0x20000000
    BOOT TYPE : EMMC_FLASH_BOOT
    SOC VERIFY : C1
    Boot Ok!

    [AP] : Initial info read Ok!

    Brand : PMZ
    ProdName : PMZ G7
    ProdModel : G7
    Device : G7
    AndroidVer: 4.4.2
    MTKxCPU : MT6572
    MTKxPRJ : ALPS.KK1.MP6.V1


    الروابط تظهر للاعضاء فقط
    التعديل الأخير تم بواسطة zinnou ; 04-09-2016 الساعة 14:14

  16. 4 أعضاء قالوا شكراً لـ zinnou على المشاركة المفيدة:


  17. #50
    cheddihouse غير متواجد حالياً
    :: Super User ::

    تاريخ التسجيل
    Jul 2013
    الدولة
    merouana batna
    المشاركات
    847
    معدل تقييم المستوى
    59
    شكراً
    716
    تم شكره
    5,254

    افتراضي

    حصريا فلاشة تاب zentality c-727

    فلاشات MTK ANDROID مسحوبة ب InfinityBox CM2MTK

    معلومات الفلاشة

    كود:
    Operation : Read Flash [ v1.40 ]
    
    1. Power Off Phone , Remove battery , Insert back
    2. Insert USB cable. In some cases require hold BootKey
    
    Wait for phone...
    Phone found! [ 6 ]
    Sync...
    Inital regs read done
    Boot Info : 
    BB_CPU_ID : 6572
    BB_CPU_HW : CA01
    BB_CPU_SW : 8A00
    BB_CPU_SB : 0000
    BB_CPU_NM : [MediaTek] MT6572_S00
    Processing BROM stage
    BLVersion : 0x01
    SecCfgVal : 0x00000000
    BromVersion : 0xFF
    BLVersion : 0x01
    Preloader Status : Alive
    Processing DA stage
    DA Select done , sending 
    DA Ver : MTK_AllInOne_DA_v5.1540.01.01
    NAND_ID : 00000000000000000000000000000000
    eMMC_ID : 90014A4838473264040300002DD97137
    DA Stat : v4.2 on BBID : 0x88
    DA Sent. Configure setting now ... 
    DA started successuflly
    eMMC FlashIC initialized
    [eMMC] : FLASH_VEN : 0090 , OEM : 014A
    [eMMC] : FLASH_INF : [HYNIX] , d2G8
    [eMMC] : FLASH_CID : 90014A4838473264040300002DD97137
    [eMMC] : FLASH_EXT : 0x00400000 , 0x00400000 , 0x00400000
    [eMMC] : FLASH_LEN : 0x00000001D2000000
    [eMMC] : FLASH_UCP : 7456 MiB
    INT RAM    : 0x00020000
    EXT RAM    : 0x40000000
    BOOT TYPE  : EMMC_FLASH_BOOT
    SOC VERIFY : C1
    Boot Ok!
    
    Reading Flash Conent now ... 
    
    Brand     : alps
    ProdName  : m72_emmc_s6_pcb22_1024_8g1g_kanlaimi_c727
    ProdModel : C-727
    Device    : m72_emmc_s6_pcb22_1024_8g1g_kanlaimi_c727
    AndroidVer: 4.2.2
    MTKxCPU   : MT6572
    MTKxPRJ   : ALPS.JB3.MP.V1.12
    
    [Read Ok] : preloader_m72_emmc_s6_pcb22_1024_8g1g_kanlaimi_c7
    [Read Ok] : MBR
    [Read Ok] : EBR1
    [Read Ok] : lk.bin
    [Read Ok] : boot.img
    [Read Ok] : recovery.img
    [Read Ok] : secro.img
    [Read Ok] : logo.bin
    [Read Ok] : system.img
    [Read Ok] : cache.img
    [Read Ok] : userdata.img
    [Read Ok] : fat.img
    
    [ScatCFG] : MT6572 / V1.1.1 / m72_emmc_s6_pcb22_1024_8g1g_kanlaim / EMMC
    FW Size : 514 MiB
    Scatter saved to : I:\c727\MT6572__alps__C-727__m72_emmc_s6_pcb22_1024_8g1g_kanlaimi_c727__4.2.2__ALPS.JB3.MP.V1.12\
    
    All done!


    الروابط تظهر للاعضاء فقط


    pass/dzgsm

  18. 8 أعضاء قالوا شكراً لـ cheddihouse على المشاركة المفيدة:


صفحة 5 من 7 الأولىالأولى ... 34567 الأخيرةالأخيرة

المواضيع المتشابهه

  1. تجربتي الاولى مع InfinityBox CM2MTK
    بواسطة cheddihouse في المنتدى قسم (Infinity CM2MTK)
    مشاركات: 5
    آخر مشاركة: 01-09-2017, 12:23
  2. حمل كل فلاشات android+bada بضغطة زر واحدة
    بواسطة farouk في المنتدى قسم فلاشات السامسونج Samsung
    مشاركات: 13
    آخر مشاركة: 10-23-2016, 00:15
  3. موضوع مميز : Firmware (فلاشات) لأجهزة الـ MOTOROLA ANDROID
    بواسطة DZ-Developer في المنتدى قسم فلاشات الموتورولا motorola
    مشاركات: 27
    آخر مشاركة: 07-29-2013, 01:56

الكلمات الدلالية لهذا الموضوع

ضوابط المشاركة

  • لا تستطيع إضافة مواضيع جديدة
  • لا تستطيع الرد على المواضيع
  • لا تستطيع إرفاق ملفات
  • لا تستطيع تعديل مشاركاتك
  •  
الأرشيف | الاتصال بنا | Privacy-Policy