izawa2008
عضو أساسي
رد: تجارب الاعضاء فى تفليش وعمل ريبير وفك الشفرة علىz3x
LG X power2
X320K 7.0
FRP Reset
LG X power2
X320K 7.0
FRP Reset
[B]Selected model: [COLOR="#FF0000"]B2100[/COLOR]
Selected com port: COM29
Selected speed port: 921600
Please, connect phone and press power button 3 seconds
[COLOR="#FF0000"]Phone Detected[/COLOR]
Use automatic parameters
Phone in TAT MODE
Phone IMEI: 358XXXXXXXXX79
Phone SW: B2100BULB1
Phone BT ADDR: 380A-94-D62D2D
Phone SN: R31XXXXJR4
Deactivated MSL - TRUE
[COLOR="#FF0000"][FREZEE]: 75750070
[NET Lock]: 77488320
[Subset Lock]: 00000000
[SP Lock]: 00000000
[CP Lock]: 00000000
[Sim Lock]: 00000000
[Phone Lock]: 00000000[/COLOR]
Read info - ok
Elapsed time: 17 second, sw ver: 3.5.0040
-------------------------------------------------------------------------------
Selected model: [COLOR="#FF0000"]B2100[/COLOR]
Selected com port: COM29
Selected speed port: 921600
Please, connect phone and press power button 3 seconds
[COLOR="#FF0000"]Phone Detected[/COLOR]
Use automatic parameters
Phone in TAT MODE
Phone IMEI: 358XXXXXXXXX79
Phone SW: B2100BULB1
Phone BT ADDR: 380A-94-D62D2D
Phone SN: R31XXXXJR4
Deactivated MSL - TRUE
All Code change to -> 00000000
[COLOR="#FF0000"]Unlock - ok[/COLOR]
Elapsed time: 29 second, sw ver: 3.5.0040
-------------------------------------------------------------------------------[/B]
Operation: [COLOR="#FF0000"]Reset FRP[/COLOR]
Selected model: [COLOR="#FF0000"]SM-G532F[/COLOR]
Software version: 41.2
You must activate ADB before reset FRP Yes
Goto 'Terms and conditions' press 'NEXT' and 'AGREE' EULA Yes
Waiting ADB device... OK
Reading phone info...
Model: [COLOR="#FF0000"]SM-G532F[/COLOR]
Android version: [COLOR="#FF0000"]6.0.1[/COLOR]
PDA version: [COLOR="#FF0000"]G532FXWU1ASB1[/COLOR]
CSC version: [COLOR="#FF0000"]G532FOJV1ASB1[/COLOR]
Phone version: [COLOR="#FF0000"]G532FXXU1ARF3[/COLOR]
Product code: [COLOR="#FF0000"]SM-G532FZSDTKD[/COLOR]
CSC country code: [COLOR="#FF0000"]Algeria[/COLOR]
CSC sales code: [COLOR="#FF0000"]TKD[/COLOR]
Phone SN: [COLOR="#FF0000"]R28XXXXK1P[/COLOR]
IMEI: [COLOR="#FF0000"]352XXXXXXXXXX65[/COLOR]
HW version: MP 0.300
RF cal date: [COLOR="#FF0000"]20181115[/COLOR]
Chip name: [COLOR="#FF0000"]MT6737T[/COLOR]
Modem board: [COLOR="#FF0000"]MT6737T[/COLOR]
Security patch: [COLOR="#FF0000"]2018-08-01[/COLOR]
Boot Warranty bit: 0
SIM State: ABSENT,ABSENT
[COLOR="#008000"]Bypass FRP... OK[/COLOR]
[COLOR="#0000FF"]For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset'[/COLOR]
Done with Samsung Tool PRO v.41.2
UNLOCK INSTRUCTIONS:
To unlock NEW security type:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Unlock' button and select 'New Unlock' for direct unlock.
To unlock OLD security type:
1. Power on the phone.
2. Connect the phone to PC with USB cable.
3. Check Samsung modem in device manager, install drivers if needed.
4. Press 'Unlock' button and select 'Unlock' for direct unlock.
To read security codes (all security types):
1. Power on the phone.
2. Connect the phone to PC with USB cable.
3. Check Samsung modem in device manager, install drivers if needed.
4. Press 'Read codes' button to read security codes.
To read security codes via diagnostic port:
1. Power on the phone.
2. Type *#0808# and select 'DM+MODEM+ADB'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Press 'Read Codes DIAG' button to read security codes.
To reset Google account activation lock:
1. ADB must be activated in any way (you can flash sBoot from combination firmware,
make sure, that you are not upgrade sBoot).
2. Connect the phone to PC with USB cable, install drivers if needed.
3. Select device in ADB settings.
4. Press 'Reset FRP' and follow the instructions in program.
5. When process done, press 'Back' on phone and perform factory reset from phone settings.
To reset Google account activation or Samsung reactivation lock:
1. Power on the phone in download mode (turn off phone, press vol.down + home + power).
2. Connect the phone to PC with USB cable, install drivers if needed.
3. Press 'Reset FRP/React/EE' to deactivate Google/Samsung/EE account activation lock.
4. After phone reboot, go to settings and perform factory reset.
Operation: Reset FRP/React/EE
Selected model: SM-J700H/DS
Software version: 41.2
Searching Samsung USB Flash interface... COM12 detected
Setup connection... OK
Reading PIT from phone... OK
Searching FRP lock... OK
[COLOR="#FF0000"]Erasing FRP lock... OK
Reset done[/COLOR]
[COLOR="#00FF00"]For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset'[/COLOR]
Done with Samsung Tool PRO v.41.2
[B] UNLOCK INSTRUCTIONS:
Flash mode:
COM Port does not matter, phone will be detect automatically.
1. Press 'Unlock' button for direct unlock or 'Read codes' to read security codes.
2. Connect the phone in flash mode (Press '1' button and connect USB cable).
Normal mode:
1. Connect powered on phone to USB, choose correct COM port in port settings.
1. Press 'Unlock' button for direct unlock or 'Read codes' to read security codes.
Operation: [COLOR="#FF0000"]Read User Lock[/COLOR]
Selected model: [COLOR="#FF0000"][COLOR="#FF0000"]SM-B360E[/COLOR][/COLOR]
Selected port: [COLOR="#FF0000"][COLOR="#FF0000"]COM15 SCI USB2Serial[/COLOR][/COLOR]
Software version: 41.2
Waiting phone... detected COM15
Sending FDL... OK
Reconnecting phone... OK
Sending FDL2... OK
Reading data from phone ... OK
[COLOR="#FF0000"]Phone lock: 00171997 (OFF)[/COLOR]
Done with Samsung Tool PRO v.41.2[/B]
[B] UNLOCK INSTRUCTIONS:
Direct unlock:
Phone must be rooted!
If the software can't root the phone automatically,
then you must root your device manually.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Unlock' button and select 'New Unlock' for direct unlock.
To read security codes (without root permissions):
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read codes' button to read security codes.
To reset Google account activation lock:
1. ADB must be activated in any way (you can flash sBoot from combination firmware,
make sure, that you are not upgrade sBoot).
2. Connect the phone to PC with USB cable, install drivers if needed.
3. Select device in ADB settings.
4. Press 'Reset FRP' and follow the instructions in program.
5. When process done, press 'Back' on phone and perform factory reset from phone settings.
Operation: Reset FRP
Selected model: SM-G532F
Software version: 41.2
You must activate ADB before reset FRP Yes
Goto 'Terms and conditions' press 'NEXT' and 'AGREE' EULA Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-G532F
Android version: 6.0.1
PDA version: G532FXWU1AQA1
CSC version: G532FOJV1AQA1
Phone version: G532FXXU1APL1
Product code: SM-G532FMDDXSG
CSC country code: UAE
CSC sales code: XSG
Phone SN: RV8XXXXXMKA
IMEI: 35223XXXXXXX353
HW version: MP 0.300
RF cal date: 20181022
Chip name: MT6737T
Modem board: MT6737T
Security patch: 2017-01-01
Boot Warranty bit: 1
SIM State: ABSENT,ABSENT
Bypass FRP... OK
For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset'
Done with Samsung Tool PRO v.41.2[/B]
[B] FLASH INSTRUCTIONS:
1. Choose correct flash file(s).
2. If you have PIT file chosen, then you must check 'Repartition' option.
3. Check flashing options if needed (Repartition, EFS clear, Boot update).
4. Power on the phone in download mode (turn off phone, press vol.down + home + power).
5. Connect the phone to PC with USB cable, install drivers if needed.
6. Press 'Flash' button.
Operation: Flash
Selected model: GT-I9100G
Software version: 41.4
File analysis... OK
Total file size: 0x27A49A30 (634 Mb)
Searching USB Flash interface... COM12 detected
Setup connection... OK
Reading PIT from phone... OK
Sending cache.img... OK
Sending factoryfs.img... OK
Sending hidden.img... OK
Sending MLO... OK
Sending modem.bin... OK
Sending param.lfs... OK
Sending Sbl.bin... OK
Sending zImage... OK
Flashing done (time - 00:02:43)
Done with Samsung Tool PRO v.41.4[/B]
[B][FONT=Arial Black] UNLOCK INSTRUCTIONS:
1. Power on the phone.
2. Connect the phone to PC with USB cable.
3. Check Samsung modem in device manager, install drivers if needed.
4. Press 'Unlock' button for direct unlock or 'Read codes' to read security codes.
If phone ask codes after unlocking, use:
PUK - 12345678
PIN - 11111111
Operation: Reset FRP/React/EE
Selected model: SM-T285
Software version: 34.8
Searching Samsung USB Flash interface... COM3 detected
Setup connection... OK
Reading PIT from phone... OK
Searching FRP lock... OK
Erasing FRP lock... OK
Reset done
For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset'
Done with Samsung Tool PRO v.41.6[/FONT][/B]