Establish communication with the phone...FAILED htc titan

hosnisat

عضو
إنضم
19 سبتمبر 2013
المشاركات
23
مستوى التفاعل
2
النقاط
3
www.gulfup.com
[/url][/IMG]


Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.55
Selected Resurrector: [HTC Titan (PI3911000) V1.0.4962.62206]

Connecting to the dead ****...OK
Detected dead **** ID: 0x27B360E1 - CORRECT!
Set I/O Voltage reads as 1.81V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]

Resurrection sequence started.
Establish communication with the phone...FAILED
ERROR(0x44): Communication is not established. Terminating.
 
التعديل الأخير:

GSM RENOVER

:: مشرف ::, قسم صيانة Nokia, قسم صيانة Samsung, قس
إنضم
21 فبراير 2013
المشاركات
1,940
مستوى التفاعل
8,212
النقاط
113
الإقامة
ارض الله الواسعة
رد: Establish communication with the phone...FAILED htc titan

كود:
1.9. Error code 0x44
Returned by the box’s firmware if attempted target HALT operation failed.
 
Solution:
Check target device connection. In case You're trying to access device ****d on MSM8255/MSM8655 CPU, this error can be caused by CPU fuses. In case that there is no boot device present, or DBL (FSBL) partition is damaged, fused devices will return this error.
Example - HTC phones with damaged eMMC.
 

hosnisat

عضو
إنضم
19 سبتمبر 2013
المشاركات
23
مستوى التفاعل
2
النقاط
3
رد: Establish communication with the phone...FAILED htc titan

كود:
1.9. Error code 0x44
Returned by the box’s firmware if attempted target HALT operation failed.
 
Solution:
Check target device connection. In case You're trying to access device ****d on MSM8255/MSM8655 CPU, this error can be caused by CPU fuses. In case that there is no boot device present, or DBL (FSBL) partition is damaged, fused devices will return this error.
Example - HTC phones with damaged eMMC.

أخي لو توضح اكثر ماهو الحل
أرجو منك المساعدة
 

GSM RENOVER

:: مشرف ::, قسم صيانة Nokia, قسم صيانة Samsung, قس
إنضم
21 فبراير 2013
المشاركات
1,940
مستوى التفاعل
8,212
النقاط
113
الإقامة
ارض الله الواسعة
رد: Establish communication with the phone...FAILED htc titan

تفقد المسارات مرة اخرى ... و خاصة gnd
اي الخط السالب.

غير ذلك فالخلل في الذاكرة الداخلية .... اي مشكل هارد و لا يمكن معالجته ببوكسات الجيتاج.

و الله اعلم.

انتظر تاكيدات اكثر من الاعضاء .... فلا اتعامل كثيرا مع اجهزة htc ... ; و كل الذي ذكر سابقا هو تحليل للخطا 44 من الموقع الرسمي.
 

hosnisat

عضو
إنضم
19 سبتمبر 2013
المشاركات
23
مستوى التفاعل
2
النقاط
3
رد: Establish communication with the phone...FAILED htc titan

جميع المسارات صحيحة

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.55
Selected Resurrector: [HTC Titan (PI3911000) V1.0.4962.62206]

Connecting to the dead ****...OK
Set I/O Voltage reads as 1.80V, TCK Frequency is RTCK

Detected dead **** ID: 0x27B360E1
 

DZ-Developer

:: الإدارة R&D ::
إنضم
28 أبريل 2012
المشاركات
6,597
مستوى التفاعل
30,632
النقاط
113
الإقامة
الجزائر الغالية
رد: Establish communication with the phone...FAILED htc titan

جميع المسارات صحيحة

Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.55
Selected Resurrector: [HTC Titan (PI3911000) V1.0.4962.62206]

Connecting to the dead ****...OK
Set I/O Voltage reads as 1.80V, TCK Frequency is RTCK

Detected dead **** ID: 0x27B360E1

غير سرعة الكتابة
 

hosnisat

عضو
إنضم
19 سبتمبر 2013
المشاركات
23
مستوى التفاعل
2
النقاط
3
رد: Establish communication with the phone...FAILED htc titan

لقد نجحت معي العملية واصبح الهاتف يشتغل بعد flash dump بالريف بوكس
ولكن واجهتني مشكلة عند اقلاع الهاتف
attachment.php

attachment.php
 
أعلى