weaamsalah
عضو نشط
- إنضم
- 12 يناير 2014
- المشاركات
- 37
- مستوى التفاعل
- 26
- النقاط
- 0
عندى جوال s7562 فقد البوت نتيجة ركفرى مطور
ومن يومين وانا احاول اصلاحة عن طريق Riff Box
ولم افلح حتى ساعة كتابة استغاثتى هذه
واليكم ملخص لرسائل الخطأ التى تظهر لى
واتمنى من الله انا اجد فيكم من يساعدنى
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.55
Selected Resurrector: [Samsung S7562 V1.0.4816.57076]
Connecting to the dead ****...OK
Detected dead **** ID: 0x106230E1 - IGNORED!
Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]
Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK
Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0100 (A00SJJ, 0x0000E9000000 Bytes = 3.64 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0100 (A00SJJ, 0x000000100000 Bytes = 1.00 MB)
Selected Resurrection Data for the eMMC Chip with Capacity = 3.64GB
Flashing the dead ****...
ERROR: Timeout while waiting for DCC Loader response. Trying to recover...OK
ERROR: Timeout while waiting for DCC Loader response. Trying to recover...OK
ERROR: Timeout while waiting for DCC Loader response. Trying to recover...OK
ERROR: Stopped due to multiple communication errors. Terminating at 0x000000000000
ومن يومين وانا احاول اصلاحة عن طريق Riff Box
ولم افلح حتى ساعة كتابة استغاثتى هذه
واليكم ملخص لرسائل الخطأ التى تظهر لى
واتمنى من الله انا اجد فيكم من يساعدنى
Open serial port...OK
Connecting to the RIFF Box...OK
Firmware Version: 1.37, JTAG Manager Version: 1.55
Selected Resurrector: [Samsung S7562 V1.0.4816.57076]
Connecting to the dead ****...OK
Detected dead **** ID: 0x106230E1 - IGNORED!
Set I/O Voltage reads as 2.61V, TCK Frequency is RTCK
Adaptive Clocking RTCK Sampling is: [Sample at MAX]
Resurrection sequence started.
Establish communication with the phone...OK
Initializing internal hardware configuration...OK
Uploading resurrector data into memory...OK
Starting communication with resurrector...OK
Detected an Initialized FLASH1 Chip, ID: 0x0015/0x0100 (A00SJJ, 0x0000E9000000 Bytes = 3.64 GB)
Detected an Initialized FLASH2 Chip, ID: 0x0015/0x0100 (A00SJJ, 0x000000100000 Bytes = 1.00 MB)
Selected Resurrection Data for the eMMC Chip with Capacity = 3.64GB
Flashing the dead ****...
ERROR: Timeout while waiting for DCC Loader response. Trying to recover...OK
ERROR: Timeout while waiting for DCC Loader response. Trying to recover...OK
ERROR: Timeout while waiting for DCC Loader response. Trying to recover...OK
ERROR: Stopped due to multiple communication errors. Terminating at 0x000000000000