رد: مساعدة في نوكيا 2-2700
Booting Phone via USB...
======================================================
======================================================
USB Phone BUSCheck Boot
======================================================
======================================================
Then Perform Steps 1, 2, 3 and 4...
1. Remove USB and Battery...
2. Insert USB.
3. Insert Battery. (Some phones boot automatically)
4. Please Power on phone shortly...
AdvanceFBox SendBootCodeEx
InitialiseBootstrap_DCT5 DIR
BootFlashMode_DCT5
READING BOOTROM
BootFlashModeDCT5Ex Succeded After 0 Tries
SYSTEM_ID_RESPONSE_BB5 (0xC0) - 96 (0x60) bytes returned
Number of Sub Blocks 7 (0x07)
1 SYSTEM_ASIC_ID 01
Block Length : 21 (15)
BB ASIC Index : 0 (00) CMT
ID DWORD 0 : 00000001
ID DWORD 1 : 00000226
ID DWORD 2 : 00010006
ID DWORD 3 : 030C1921
ID DWORD 4 : 01033000
2 EM_ASIC_ID 02
Block Length : 5 (05)
BB ASIC Index : 0 (00) CMT
ID DWORD 0 : 00000296
3 EM_ASIC_ID 02
Block Length : 5 (05)
BB ASIC Index : 0 (00) CMT
ID DWORD 0 : 00000B22
4 PUBLIC_ID 12
Block Length : 21 (15)
BB ASIC Index : 0 (00) CMT
ID DWORD 0 : 2A40010D
ID DWORD 1 : 30860F56
ID DWORD 2 : 1AD50DCB
ID DWORD 3 : B75E762D
ID DWORD 4 : 9C5490FB
5 ASIC_MODE_ID 13
Block Length : 2 (02)
BB ASIC Index : 0 (00) CMT
Mode Id : 00
6 ROOT_KEY_HASH 14
Block Length : 17 (11)
BB ASIC Index : 0 (00) CMT
Hash : 9D DB FC FE 6E 73 CE D7 D8 C6 26 8C 8E B8 57 23
7 ROM_ID 15
Block Length : 9 (09)
BB ASIC Index : 0 (00) CMT
CRC 0 : 273F6D55
CRC 1 : DFAAF68F
ERROR: Use FBUS Connection for this Phone...
======================================================
The CPU of this Phone is not capable of
USB New Protocol Communication
======================================================
Scanning USB Ports...
======================================================
ERROR: Active Phone Handle was NOT DETECTED
======================================================
TIP: Make sure that Phone USB Connection Mode is
OVI Suite Mode
or
PC Suite Mode
======================================================
Scanning USB Ports...
======================================================
ERROR: Active Phone Handle was NOT DETECTED
======================================================
TIP: Make sure that Phone USB Connection Mode is
OVI Suite Mode
or
PC Suite Mode
عند ضغط على read securty code لا يتعرف عليه البوكس
هل يمكن تفليش الهاتف بكابل يوسبي وهل سيتم ازالة الكود ام لا اخي عبدو
