mouaadhben
عضو نشط
- إنضم
- 19 ديسمبر 2013
- المشاركات
- 34
- مستوى التفاعل
- 15
- النقاط
- 0
RPL Creation started...
Processing CMT Part...
[Nokia USB Flashing Generic]: Port opened OK!
Warning: Phone not detected, using Rap Public ID in File**** and reading Certificates Only
Booting CMT...
[Nokia USB Flashing Generic]: Port opened OK!
Old ROM Detected
CMT_SYSTEM_ASIC_ID: 000000030000022600010007600C192102031104
CMT_EM_ASIC_ID: 00000C35
CMT_EM_ASIC_ID: 00000C30
CMT_PUBLIC_ID: 2B3001182DA003440C0E44523CAA320C47311BBF
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 916F75217F32081248B15C38DFC8E81B
CMT_BOOT_ROM_CRC: E693EF0D
CMT_SECURE_ROM_CRC: AC22615B
CMT Ready!
Searching for BootCode: DualLine 32Bit
RAPUv11_2nd.fg, Type: 2nd Boot Loader, Rev: 768.12.14.0, Algo: BB5
Using NEW BB5 FLASHING PROTOCOL
Waiting for USB Boot ROM Answer...
Prepare phone failed with message ->
The ROM Refused to start Secondary Loader. Common Reasons:
1. Battery voltage is too low.
2. Transmission error occured. Usually happens when You put battery on while USB cable plugged. Try unplug USB cable, re-insert battery, plug USB Cable.
3. Check USB cable quality, connect to USB 2.0 Port
4. It may be also phone hardware problem
5. Also, loader may be corrupted, or current BootROM don't support it (affected are RAP3Gv3 and RAPIDO phones)
Failed to Create RPL from phone -> Failed to Boot / Prepare Phone
RPL backup thread finished, continuing...
Pre flash tasks finished, continuing...
Processing rm632_102.002_U005.000_prd.uda.fpsx (CMT).
Processing CMT Part...
[Nokia USB Flashing Generic]: Port opened OK!
Warning: Phone not detected, using Rap Public ID in File**** and reading Certificates Only
Booting CMT...
[Nokia USB Flashing Generic]: Port opened OK!
Old ROM Detected
CMT_SYSTEM_ASIC_ID: 000000030000022600010007600C192102031104
CMT_EM_ASIC_ID: 00000C35
CMT_EM_ASIC_ID: 00000C30
CMT_PUBLIC_ID: 2B3001182DA003440C0E44523CAA320C47311BBF
CMT_ASIC_MODE_ID: 00
CMT_ROOT_KEY_HASH: 916F75217F32081248B15C38DFC8E81B
CMT_BOOT_ROM_CRC: E693EF0D
CMT_SECURE_ROM_CRC: AC22615B
CMT Ready!
Searching for BootCode: DualLine 32Bit
RAPUv11_2nd.fg, Type: 2nd Boot Loader, Rev: 768.12.14.0, Algo: BB5
Using NEW BB5 FLASHING PROTOCOL
Waiting for USB Boot ROM Answer...
Prepare phone failed with message ->
The ROM Refused to start Secondary Loader. Common Reasons:
1. Battery voltage is too low.
2. Transmission error occured. Usually happens when You put battery on while USB cable plugged. Try unplug USB cable, re-insert battery, plug USB Cable.
3. Check USB cable quality, connect to USB 2.0 Port
4. It may be also phone hardware problem
5. Also, loader may be corrupted, or current BootROM don't support it (affected are RAP3Gv3 and RAPIDO phones)
Failed to Create RPL from phone -> Failed to Boot / Prepare Phone
RPL backup thread finished, continuing...
Pre flash tasks finished, continuing...
Processing rm632_102.002_U005.000_prd.uda.fpsx (CMT).
