- إنضم
- 13 أغسطس 2012
- المشاركات
- 5,762
- مستوى التفاعل
- 19,174
- النقاط
- 113
Added Mtk_Android_Tool in Android Tab
Added These Models for Service
-----Alcatel------
OT-4030
OT-4030A
OT-4030E
OT-4030X
OT-4030D
OT-5020
OT-5020D
OT-5020E
OT-5021
OT-5035
OT-6010
OT-6010D
OT-6030
OT-6033
OT-6040
OT-7025
OT-8020
VF-875
VF-875X
VF-975
OT-997
OT-997D
OT-S500
OT-S600
OT-S710
OT-S800
OT-S810
OT-S820
OT-S850
OT-S950
-----ZTE------
ZTE V793
ZTE V889M
ZTE V807
ZTE Blade C
Added in Main Tab of Mtk Android Tool V1.11
Firmware Settings
Detailed info about Firmware
Enable/Disable Ver check
Enable/Disable Format Before Flash
Enable/Disable MD5 Checsum Flash Check
Enable/Disable High Speed Flash
Check for Auto Reboot after Flash
Enable/Disable Preloader Boot
Enable/Disable debug log
Enable/Disable Display Boot Info
Boot Info
Write Flash
Reset Phone
Added in Unlocking Tab of Mtk Android Tool V1.11
Enable/Disable Is phone with Dual sim
Reboot Phone in advanced ****
Read Codes in advanced ****
Read Code
Direct Unlock
Enable/Disable Clean Boot
Added in Service Tab of Mtk Android Tool V1.11
Format Phone ( Custom )
Read Flash ( Custom )
Dump Phone ( eMMC )
Enable/Disable UserData Read
Sinc Simlock
Imei Write 1
Imei Write 2
Imei Write 3
Imei Write 4
Enable/Disable Calculate CHK
Enable/Disable Clean Boot
Enable/Disable Sync Simlock
Read NvRam
Write NvRam
Index of ./VolcanoBox/Full Installer/
Full Installer Released in PARTS ( 150 MB each )
Use 7zip
No more Mirror Links !!
<< Help Manual >>
How to flash firmware?
1. Download from support firmware package. ( will upload soon ) or ( read flash file from phone )
2. Click open scat file and select scat from firmware directory.
3. Open firmware setting and check if selected all files.
4. Reinsert battery, click write flash and insert usb cable.
5. Wait untill ready.
6. Reinsert battery and start phone (recommended first start without
sim card).
How to wipe phone ?
1.Press reset phone(user stuff will gone).
On alcatel emmc phones this also reset code counter.
Alcatel android have damaged imei, how to solve?
1.Usually flashing help in this case.
Alcatel phones have imei in otp and if NVRAM become corupted, it
will be
autogenerated
after flash.
2.If this not help, posible your phone have hardware damage(modem
part).
How to format phone? (advanced only) ?
1. Click boot info.
2. From displayed partitions choose needed partition start and
length.
3. Click Format phone and insert values(hex or dec).
4. Click format.
P.S.
Don t format preloader, if preloader is formated, will need to make
tp to get phone alive.
How to read flash ?
1. Click boot info
2. Select needed partition start and length
3. Press read flash and fill ad*******.
4. Press read.
How to dump phone.?
1.Only EMMC phones supported for dumping.
2.To make memory backup press dump phone button.
Userdata have very big size, please consider this when start dump
phone.
2.Nand phones not supported for dumping.
How to unlock phone? (Read Codes)
1. Select model from list.
2. Click Read Codes
P.S.
For this operation need special(CDC) driver to be installed
manaully.
Download driver from support and install if PC ask for this driver.
P.S.
Please note, do not play with preloader.
Phone can be maked alive from any state if preloader not touched.
Enter engeneering menu
*#*#3646633#*#*
Known problems:
1. Phone stuck on logo or restart on boot screen = Reflash phone.
2. Phone work ok but no network.
2. 1 Check IMEI.
2. 2 Check different firmwares, possible not math gsm module with
firmware.
2. 3 Corupted modem file, flash phone.
3. Phone work ok, but no imei.
3. 1 Flash phone, possible need to check different firmwares.
If modem file is for different hardware revision result will be no
IMEI also.
Added These Models for Service
-----Alcatel------
OT-4030
OT-4030A
OT-4030E
OT-4030X
OT-4030D
OT-5020
OT-5020D
OT-5020E
OT-5021
OT-5035
OT-6010
OT-6010D
OT-6030
OT-6033
OT-6040
OT-7025
OT-8020
VF-875
VF-875X
VF-975
OT-997
OT-997D
OT-S500
OT-S600
OT-S710
OT-S800
OT-S810
OT-S820
OT-S850
OT-S950
-----ZTE------
ZTE V793
ZTE V889M
ZTE V807
ZTE Blade C
Added in Main Tab of Mtk Android Tool V1.11
Firmware Settings
Detailed info about Firmware
Enable/Disable Ver check
Enable/Disable Format Before Flash
Enable/Disable MD5 Checsum Flash Check
Enable/Disable High Speed Flash
Check for Auto Reboot after Flash
Enable/Disable Preloader Boot
Enable/Disable debug log
Enable/Disable Display Boot Info
Boot Info
Write Flash
Reset Phone
Added in Unlocking Tab of Mtk Android Tool V1.11
Enable/Disable Is phone with Dual sim
Reboot Phone in advanced ****
Read Codes in advanced ****
Read Code
Direct Unlock
Enable/Disable Clean Boot
Added in Service Tab of Mtk Android Tool V1.11
Format Phone ( Custom )
Read Flash ( Custom )
Dump Phone ( eMMC )
Enable/Disable UserData Read
Sinc Simlock
Imei Write 1
Imei Write 2
Imei Write 3
Imei Write 4
Enable/Disable Calculate CHK
Enable/Disable Clean Boot
Enable/Disable Sync Simlock
Read NvRam
Write NvRam
Index of ./VolcanoBox/Full Installer/
Full Installer Released in PARTS ( 150 MB each )
Use 7zip
No more Mirror Links !!
<< Help Manual >>
How to flash firmware?
1. Download from support firmware package. ( will upload soon ) or ( read flash file from phone )
2. Click open scat file and select scat from firmware directory.
3. Open firmware setting and check if selected all files.
4. Reinsert battery, click write flash and insert usb cable.
5. Wait untill ready.
6. Reinsert battery and start phone (recommended first start without
sim card).
How to wipe phone ?
1.Press reset phone(user stuff will gone).
On alcatel emmc phones this also reset code counter.
Alcatel android have damaged imei, how to solve?
1.Usually flashing help in this case.
Alcatel phones have imei in otp and if NVRAM become corupted, it
will be
autogenerated
after flash.
2.If this not help, posible your phone have hardware damage(modem
part).
How to format phone? (advanced only) ?
1. Click boot info.
2. From displayed partitions choose needed partition start and
length.
3. Click Format phone and insert values(hex or dec).
4. Click format.
P.S.
Don t format preloader, if preloader is formated, will need to make
tp to get phone alive.
How to read flash ?
1. Click boot info
2. Select needed partition start and length
3. Press read flash and fill ad*******.
4. Press read.
How to dump phone.?
1.Only EMMC phones supported for dumping.
2.To make memory backup press dump phone button.
Userdata have very big size, please consider this when start dump
phone.
2.Nand phones not supported for dumping.
How to unlock phone? (Read Codes)
1. Select model from list.
2. Click Read Codes
P.S.
For this operation need special(CDC) driver to be installed
manaully.
Download driver from support and install if PC ask for this driver.
P.S.
Please note, do not play with preloader.
Phone can be maked alive from any state if preloader not touched.
Enter engeneering menu
*#*#3646633#*#*
Known problems:
1. Phone stuck on logo or restart on boot screen = Reflash phone.
2. Phone work ok but no network.
2. 1 Check IMEI.
2. 2 Check different firmwares, possible not math gsm module with
firmware.
2. 3 Corupted modem file, flash phone.
3. Phone work ok, but no imei.
3. 1 Flash phone, possible need to check different firmwares.
If modem file is for different hardware revision result will be no
IMEI also.
