تعريب اشا 306

deihmi

عضو أساسي
إنضم
12 سبتمبر 2012
المشاركات
841
مستوى التفاعل
1,248
النقاط
0
تم بتوفيق الله وحسن عونه تعريب نوكيا 306 على بوكس السيكلون بكابل USBوالنتيجة جيدة

Establishing Connection with Box in Main Mode...
Handling device: [Cyclone Team], [Cyclone Bootloader], [Platform: Classic]
Handling device: [Cyclone Team], [Cyclone Box], [Platform: Classic]
Initializing box...
Box Firmware: Cyclone Main Application v02.20, (Aug 6 2013 20:31:40, gcc v4.3.3, RTOS V6.0.1), Type: Signed Production Application, (C) KarwosSoft 2012
Hardware Platform: Cyclone Classic Flasher Interface (c) 2008,2009 KarwosLabs
Box Serial Number: C000800B
HW Revision: C, Suitable for: Production, Case: 2011 - New Casing, MCU Manufacture Time: 2011, wk01
Initializing security card...
Card Serial Number: D00C030B
Card Firmware Revision: 010A
Card is activated
Box is activated
Started box selftests procedure
USB Voltage 4,97v PASSED
MCU Voltage 3,27v PASSED
Core Voltage 1,76v PASSED
VBAT Voltage 0,01v PASSED
VBAT Voltage 4,92v PASSED
Box VPP disabled
VPP Voltage 0,02v PASSED
Internal Box VPP Enabled
VPP Voltage 4,83v PASSED
Box VPP disabled
VPP Voltage 0,04v PASSED
External Box VPP Enabled
VPP Voltage 0,04v FAILED - IGNORED - Probably power supply is not connected
Box VPP disabled
All box selftests passed!
Super DCT4 Activation: TRUE
XGold/Blackberry Service Running, Counter: 100
Lumia No TP is ACTIVATED!
Avaiable Physical Memory: 1.1023GB
Avaiable Virtual Memory: 1.804GB
Avaiable Pagefile: 3.1023GB
Initializing FBUS...
All initialized - Ready to work
Processing pre flash tasks...
Backing up RPL...
RPL Creation started...
Processing CMT Part...
Phone not detected at USB -> Timeout, no any compatible USB device detected.
Proceeding with Recovery Mode...
Booting CMT...
[Nokia USB Flashing Generic]: Port opened OK!
XGold223 ROM Detected
Failed to Boot CMT -> Failed to get First Boot Block
Prepare phone failed with message -> Failed to Boot CMT
Recovery Mode Failed, storing Certificates Only
Booting CMT...
[Nokia USB Flashing Generic]: Port opened OK!
[Nokia USB Flashing Generic]: Port opened OK!
XGold223 ROM Detected
Failed to Boot CMT -> Failed to get First Boot Block
Prepare phone failed with message -> Failed to Boot CMT
Failed to Create RPL from phone -> Failed to Boot / Prepare Phone
RPL backup thread finished, continuing...
Pre flash tasks finished, continuing...
Processing rm767__07.42.mcusw (XGold2)...
Checking rm767__07.42.mcusw...
Flash file sorted Okay.
1 file(s) embedded into image.
Booting X-Gold via USB...
If PC Can't detect any new device, probably your phone is erased. Do following if needed:
1. Eject battery
2. Eject cable
3. Insert cable
4. Insert battery
5. Press power-on
[Nokia USB Flashing Generic]: Port opened OK!
X-Gold: Ready, MCU ID Block: 1FB300020303010100FF
[PBL] : Ready
[EBL] : Mode CC
[EBL] : Quantum_Bootloader_10.49_M1S1
[EBL] : Ready
Setting Baudrate to 6500000bps...
Baudrate Accepted (6500000bps)
Flash Chip 0x00EC3012, Samsung, Size: 64MBytes
Processing "rm767__07.42.mcusw_ebl_psi.fls"...
Sending Certificate...
Certificate Accepted
Erasing 0x40000000-0x4001FFFF...
Flashing at 0x40000000...
Flashed 131072 bytes OK
Erasing 0x40040000-0x4005FFFF...
Flashing at 0x40040000...
Flashed 131072 bytes OK
Erasing 0x40060000-0x4011FFFF...
Flashing at 0x40060000...
Flashed 786432 bytes OK
Erasing 0x40120000-0x41D3FFFF...
Flashing at 0x40120000...
Flashed 29376512 bytes OK
Erasing 0x43EE0000-0x43EFFFFF...
Processing rm767__07.42.ppm_maa (XGold2)...
Checking rm767__07.42.ppm_maa...
Flash file sorted Okay.
1 file(s) embedded into image.
Processing "package_maa.ppm_ebl_psi.fls"...
Sending Certificate...
Certificate Accepted
Erasing 0x41D40000-0x4253FFFF...
Flashing at 0x41D40000...
Flashed 6016752 bytes OK
Processing rm767__07.42.image_maa_059L901 (XGold2)...
Checking rm767__07.42.image_maa_059L901...
Flash file sorted Okay.
1 file(s) embedded into image.
Processing "package_maa_059L901.image.fls"...
Sending Certificate...
Certificate Accepted
Erasing 0x42540000-0x43EDFFFF...
Flashing at 0x42540000...
Flashed 9830400 bytes OK
Erasing 0x43F00000-0x43F7FFFF...
All images processed OK! Processing post flash tasks...
Setting Factory Defaults...
Phone not detected at USB -> Timeout, no any compatible USB device detected.
Phone not detected at USB -> Timeout, no any compatible USB device detected.
Phone not detected at USB -> Timeout, no any compatible USB device detected.
Phone not detected at USB -> Timeout, no any compatible USB device detected.
Phone not detected at USB -> Timeout, no any compatible USB device detected.
Factory defaults OK
Reading info...
Phone not detected at USB -> Timeout, no any compatible USB device detected.
Failed to read info -> Phone not detected
Read info thread finished, continuing...
Post flash tasks finished!
Flashing successfully finished!
 

Redha

إداري سابق
إنضم
16 مايو 2012
المشاركات
5,582
مستوى التفاعل
20,346
النقاط
0
الإقامة
الجزائر
رد: تعريب اشا 306

بارك الله فيك اخي على تقاسم تجربتك معنا و مبارك نجاح العملية

انا لا املك هذا البوكس لكن حبذا ان تضيف رابط الفلاشة و طريقة ترتيبها بالصورة ليستفيد اصحاب هذا البوكس
 
أعلى