تجارب الاعضاء الناجحة فى تصليح و تفليش و فك شفرات الاجهزة على Octopus Samsung

DZ-Developer

:: الإدارة R&D ::
إنضم
28 أبريل 2012
المشاركات
6,597
مستوى التفاعل
30,632
النقاط
113
الإقامة
الجزائر الغالية
112.png



الأسباب الرئيسية لعمل هذا الموضوع تبادل للخبرات من باب أولى لأن المنتدى أنشئ لهذا الغرض
كذلك طرح طرق الفلاش لموديلات قد توجد فيها خطوات قد تخفى على الأخرين ويمكن توضيحها في هذا الموضوع



يمنع الردود في الموضوع لأنه مخصص فقط للتجارب
أي رد يحذف مباشرة
 
التعديل الأخير:

DZ-Developer

:: الإدارة R&D ::
إنضم
28 أبريل 2012
المشاركات
6,597
مستوى التفاعل
30,632
النقاط
113
الإقامة
الجزائر الغالية
تفليش وتعريب Samsung C3332

لوغ العملية:

كود:
Welcome to Octopus Box Samsung software version 1.7.6
Selected firmware file: C3332JPKK5_BSY.oct
-----------------------------------------------------------------------------------
Platform: Samsung Infineon
Selected model: GT-C3332
Selected port: COM7
Baud rate: 921600
Phone must be OFF, and battary must be fully charged
Please, connect the UART  cable, Reconnect the battery, press Power 
button
Connecting...
Phone found.
Sending loaders...
Sending preloader...
Preloader send successfully
Sending mainloader...
Mainloader send successfully
Writing firmware...
Erasing Full Flash...
Full Flash erase successfully.
Writing "C3332JPKK5_psi"...
Writing "C3332JPKK5_psi" done!
Writing "C3332JPKK5_slb"...
Writing "C3332JPKK5_slb" done!
Writing "C3332JPKK5_BSY part 0"...
Writing "C3332JPKK5_BSY" done!
Writing "C3332JPKK5_BSY part 1"...
Writing "C3332JPKK5_BSY" done!
Writing "C3332JPKK5_CDS"...
Writing "C3332JPKK5_CDS" done!
Writing "C3332OJPKK5_CSC"...
Writing "C3332OJPKK5_CSC" done!
Firmware Write successfully.

لتحميل ملف الـ Firmware

هنــــــــــــــــا

كود فك الضغط

DJAMEL EDDIN
 

DZ-Developer

:: الإدارة R&D ::
إنضم
28 أبريل 2012
المشاركات
6,597
مستوى التفاعل
30,632
النقاط
113
الإقامة
الجزائر الغالية
فك فقل هاتف e1200m

فك قفل هاتف E1200M

الكابل المستعمل E210 Combo





لوغ العملية:

كود:
-----------------------------------------------------------------------------------
Platform: Samsung Swift
Selected model: GT-E1200M
Selected port: COM7
Baud rate: 115200
Please, connect phone to UART cable, insert battery and press power 
button for 3 seconds.
Phone found.
Sending preloader...
Preloader send successfully
Sending mainloader...
Mainloader send successfully
Searching patch area, please wait...
Writing patch...
Patch successfully write.
Rebooting phone
Connecting...
Phone in TAT mode.
Reading info, please wait...
Phone IMEI A: 35381905211475
SW Version: E1200MPYL
Phone SN : RV1C757HMX
Reading codes...
Freeze lock: 78348690
Net lock: 00000000
Sim lock: 00000000
Phone lock: 00000000
Sp lock: 00000000
 

DZ-Developer

:: الإدارة R&D ::
إنضم
28 أبريل 2012
المشاركات
6,597
مستوى التفاعل
30,632
النقاط
113
الإقامة
الجزائر الغالية
فك قفل شبكة c3300k

فك قفل شبكة C3300K



الكابل المستعمل MICRO UART





لوغ العملية:

كود:
Welcome to Octopus Box Samsung software version 1.8.1
-----------------------------------------------------------------------------------
Platform: Samsung Swift
Selected model: GT-C3300K
Selected port: COM7
Baud rate: 115200
Please, connect phone to UART cable, insert battery and press power button for 3 seconds.
Connecting...
Phone in TAT mode.
Reading info, please wait...
Phone IMEI A: 35571804488160
SW Version: C3300KAFK
Bluetooth MAC: A07591E8559B
Phone SN : RQGB178088
Reading codes...
Deactivating MSL...
MSL deactivate successfully
Freeze lock: 66028850
Net lock: 38049100
Sim lock: 00000000
Phone lock: 00000000
Sp lock: 00000000
 

DZ-Developer

:: الإدارة R&D ::
إنضم
28 أبريل 2012
المشاركات
6,597
مستوى التفاعل
30,632
النقاط
113
الإقامة
الجزائر الغالية
فك قفل الشاشة لـ s5360

فك قفل الشاشة لـ S5360



الكابل المستعمل: MICRO USB

cable-de-synchronisation-micro-usb-galaxy-blackberry.jpg




لوغ العملية:


كود:
Welcome to Octopus Box Samsung software version 1.8.1
-----------------------------------------------------------------------------------
To connect GT-S5360 phone you have to perform the following steps:
1. Disconnect USB cable from phone. 
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When the message appears press "Yes".
5. Connect USB cable to the phone.
6. Press "Read Info" in software.
-----------------------------------------------------------------------------------
Platform: Samsung Broadcom
Selected port: COM7
Selected model: GT-S5360
Connecting to phone on COM135
Detected phone model: GT-S5360
SW Version: S5360JPLA1/EUR_CSC/S5360XXLA2/S5360JPLA1
HW Version: GT-S5360MASTMC
Phone IMEI A: 352936-05-302814-7
ADB server killed.
Firmware compiled date: Sat Jan 14 06:54:01 KST 2012
Android version: 2.3.6 (GINGERBREAD)
Phone found.
If Screen lock removed and phone not found by software then do next 
steps:
Go to Menu->Settings->Applications->Development.
Turn on "USB Debugging" option.
When message is appear press "Yes".
Searching for a phone. Please wait...
Firmware compiled date: Sat Jan 14 06:54:01 KST 2012
Android version: 2.3.6 (GINGERBREAD)
Detecting Screen Lock parameters...
Screen Lock detected: Pattern Lock
Resetting Screen Lock...
Phone will restart now
Reset Screen Lock successfully completed.
 

DZ-Developer

:: الإدارة R&D ::
إنضم
28 أبريل 2012
المشاركات
6,597
مستوى التفاعل
30,632
النقاط
113
الإقامة
الجزائر الغالية
تعريب i9100 بالإصدار 4.1.2



تعريب i9100 بالإصدار 4.1.2

do.php


الكابل المستعمل: MICRO USB

cable-de-synchronisation-micro-usb-galaxy-blackberry.jpg


لوغ العملية:

كود:
Welcome to Octopus Box Samsung software version 1.8.4
-----------------------------------------------------------------------------------
To connect GT-I9100 phone you have to perform the following steps:
1. Disconnect USB cable from phone. 
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial ********
6. Enter "*#7284#" number.
7. Set "USB" radio button to "PDA" value.
8. Close ********
9. Go to dial ********
10. Enter "*#9090#" number.
11. Set "Diag config" to "USB" value.
12. Restart phone.
13. Press "Read Info" in software.
Selected firmware file: I9100XWLSD_I9100OJVLS6_I9100XXLS8
_HOME.oct
Please switch your phone to the download mode and connect it to a 
PC.
To put GT-I9100 phone into download mode you have to perform the 
following steps:
1. Reconnect phone battery.
2. Press and hold "Volume - "  + "Home" + "Power" buttons.
3. When phone turns on press "Volume+" button.
Found phone on 
Firmware write started.
Writing PIT section...
PIT section has been written successfully.
Writing BOOT section...
BOOT section has been written successfully.
Writing FACTORYFS section...
FACTORYFS section has been written successfully.
Writing PARAM section...
PARAM section has been written successfully.
Writing SBL1 section...
SBL1 section has been written successfully.
Writing KERNEL section...
KERNEL section has been written successfully.
Writing MODEM section...
MODEM section has been written successfully.
Writing CACHE section...
CACHE section has been written successfully.
Writing HIDDEN section...
HIDDEN section has been written successfully.
Firmware writing successfully completed.

لتفاصيل أكثر: تابع الموضوع التالي:

تفليش وتعريب galaxy SII i9100 بالإصدار 4.1.2 بنجاح على Octopus
 

DZ-Developer

:: الإدارة R&D ::
إنضم
28 أبريل 2012
المشاركات
6,597
مستوى التفاعل
30,632
النقاط
113
الإقامة
الجزائر الغالية
إزالة طلب كونت Google من Samsung-GT-S5300

إزالة طلب حساب Google من Samsung-GT-S5300

do.php


do.php


الكابل المستعمل: MICRO USB

cable-de-synchronisation-micro-usb-galaxy-blackberry.jpg


لوغ العملية:





كود:
Welcome to Octopus Box Samsung software 
version 1.8.9
--------------------------------------------------------------------
---------------
Platform: Samsung Broadcom
Selected port: COM135
Selected model: GT-S5300
Connecting to phone on COM135
Detected phone model: GT-S5300
SW Version: 
S5300JPLF3/S5300OJPLE2/S5300XXLE4/S5300JP
LF3
HW Version: GT-S5300ZWATMC
Phone IMEI A: 353170-05-910100-0
Firmware compiled date: Mon Jun 25 10:24:38 KST 
2012
Phone SN: R21C730Z8VK
Android version: 2.3.6 (GINGERBREAD)
Phone found.
If Screen lock removed and phone not found by 
software then do next steps:
Go to Menu->Settings->Applications->Development.
Turn on "USB Debugging" option.
When message is appear press "Yes".
Searching for a phone. Please wait...
Firmware compiled date: Mon Jun 25 10:24:38 KST 
2012
Phone SN: R21C730Z8VK
Android version: 2.3.6 (GINGERBREAD)
Detecting Screen Lock parameters...
Screen Lock detected: Password Lock
Resetting Screen Lock...
Phone will restart now
Reset Screen Lock successfully completed.
 

DZ-Developer

:: الإدارة R&D ::
إنضم
28 أبريل 2012
المشاركات
6,597
مستوى التفاعل
30,632
النقاط
113
الإقامة
الجزائر الغالية
تفليش وتعريب Galaxy Note II GT-N7105T

تفليش وتعريب Galaxy Note II GT-N7105T


do.php



الكابل المستعمل: MICRO USB

cable-de-synchronisation-micro-usb-galaxy-blackberry.jpg


بيانات العملية:

كود:
Welcome to Octopus Box Samsung software version 1.9.2
-----------------------------------------------------------------------------------
To connect GT-N7105T phone you have to perform the following steps:
1. Disconnect USB cable from phone. 
2. Go to Menu->Settings->Developer options.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial ********
6. Enter "*#7284#" number.
7. Set "UART" radio button to "MODEM" value.
8. Go to "Qualcomm USB Settings".
9. Select "RNDIS+DM+MODEM".
10. Close ********
11. Go to dial ********
12. Enter "*#9090#" number.
13. Select "DM/UM over HS-USB".
14. Restart phone.
15. Press "Read Info" in software.
Selected firmware file: N7105XXDMB2_N7105XEFDMB2_N7105XXDLL5_HOME.oct
Please switch your phone to the download mode and connect it to a PC.
To put GT-N7105T phone into download mode you have to perform the following steps:
1. Reconnect phone battery.
2. Press and hold "Volume - "  + "Home" + "Power" buttons.
3. When phone turns on press "Volume+" button.
Found phone on 
Firmware write started.
Writing BOOTLOADER section...
BOOTLOADER section has been written successfully.
Writing TZSW section...
TZSW section has been written successfully.
Writing SYSTEM section...
SYSTEM section has been written successfully.
Writing BOOT section...
BOOT section has been written successfully.
Writing CACHE section...
CACHE section has been written successfully.
Writing HIDDEN section...
HIDDEN section has been written successfully.
Writing RECOVERY section...
RECOVERY section has been written successfully.
Writing RADIO section...
RADIO section has been written successfully.
Firmware writing successfully completed.

لتفاصيل أكثر تابع الموضوع التالي:

تفليش وتعريب Galaxy Note II GT-N7105T الإصدار 4.1.2 بنجاح على Octopus
 

DZ-Developer

:: الإدارة R&D ::
إنضم
28 أبريل 2012
المشاركات
6,597
مستوى التفاعل
30,632
النقاط
113
الإقامة
الجزائر الغالية
تفليش وتعريب Samsung S5830I

تفليش وتعريب Samsung S5830I

do.php



الكابل المستعمل: MICRO USB

cable-de-synchronisation-micro-usb-galaxy-blackberry.jpg


بيانات العملية:

كود:
Welcome to Octopus Box Samsung software version 1.9.3
Selected firmware file: S5830iJPLB1 Android 2.3.6.oct
Please switch your phone to the download mode and connect it to a PC.
To put GT-S5830I phone into download mode you have to perform the following steps:
1. Reconnect phone battery.
2. Press and hold "Volume - "  + "Home" + "Power" buttons.
3. When phone turns on press "Volume+" button.
Found phone on 
Firmware write started.
Writing PIT section...
PIT section has been written successfully.
Writing bcm_boot section...
bcm_boot section has been written successfully.
Writing umts_cal section...
umts_cal section has been written successfully.
Writing sysparm_dep section...
sysparm_dep section has been written successfully.
Writing loke section...
loke section has been written successfully.
Writing boot section...
boot section has been written successfully.
Writing system section...
system section has been written successfully.
Writing userdata section...
userdata section has been written successfully.
Writing param_lfs section...
param_lfs section has been written successfully.
Writing modem section...
modem section has been written successfully.
Writing cache section...
cache section has been written successfully.
Firmware writing successfully completed.
 

DZ-Developer

:: الإدارة R&D ::
إنضم
28 أبريل 2012
المشاركات
6,597
مستوى التفاعل
30,632
النقاط
113
الإقامة
الجزائر الغالية
تفليش وتعريب Samsung B7510

تفليش وتعريب Samsung B7510

do.php

لإدخال الهاتف وضع Download نضغط على زر الـ (A) + زر الـPower

الكابل المستعمل: MICRO USB

cable-de-synchronisation-micro-usb-galaxy-blackberry.jpg



do.php


بيانات العملية:

كود:
Welcome to Octoplus/Octopus Box Samsung software version 1.1.8
-----------------------------------------------------------------------------------
To connect GT-B7510 phone you have to perform the following steps:
1. Disconnect USB cable from phone. 
2. Go to Menu->Settings->Applications->Development.
3. Turn on "USB Debugging" option.
4. When message is appear press "Yes".
5. Go to dial ********
6. Enter "*#9090#" number.
7. Set "Diag config" to "USB" value.
8. Restart phone.
9. Press "Read Info" in software.
Selected firmware file: B7510JPKP6_B7510OJPKP5_B7510JPKP5_HOME.oct
Please switch your phone to the download mode and connect it to a PC.
To put GT-B7510 phone into download mode you have to perform the following steps:
1. Reconnect phone battery.
2. Press and hold "Volume-" +"Power"+''Home"  buttons.
Searching for a phone. Please wait...
Found phone on 
Firmware write started.
Writing mibib section...
mibib section has been written successfully.
Writing qcsbl section...
qcsbl section has been written successfully.
Writing oemsbl section...
oemsbl section has been written successfully.
Writing amss section...
amss section has been written successfully.
Writing arm11boot section...
arm11boot section has been written successfully.
Writing boot.img section...
boot.img section has been written successfully.
Writing recovery.img section...
recovery.img section has been written successfully.
Writing system.rfs section...
system.rfs section has been written successfully.
Writing csc.rfs section...
csc.rfs section has been written successfully.
Please, restart the phone to apply changes
Firmware writing successfully completed.

 

DZ-Developer

:: الإدارة R&D ::
إنضم
28 أبريل 2012
المشاركات
6,597
مستوى التفاعل
30,632
النقاط
113
الإقامة
الجزائر الغالية
إزالة طلب حساب Google من Samsung-GT-S5360

إزالة طلب حساب Google من Samsung-GT-S5360

do.php


بيانات العملية:

كود:
Detected phone model: GT-S5360
SW Version: S5360JPLF1/S5360OJPLF1/S5360XXLF1/S5360JPLF1
HW Version: GT-S5360MASTMC
Phone IMEI A: 354352-05-711347-1
Proper android device not found. Make shure that "USB debug" option on the device is turned on.
Phone connection failed
Phone was not found on the selected port!
-----------------------------------------------------------------------------------
Platform: Samsung Broadcom
Selected port: COM1
Selected model: GT-S5360
Connecting to phone on COM58
Detected phone model: GT-S5360
SW Version: S5360JPLF1/S5360OJPLF1/S5360XXLF1/S5360JPLF1
HW Version: GT-S5360MASTMC
Phone IMEI A: 354352-05-711347-1
Proper android device not found. Make shure that "USB debug" option on the device is turned on.
Detected phone model: GT-S5360
Proper android device not found. Make shure that "USB debug" option on the device is turned on.
Phone connection failed
Phone found.
If Screen lock removed and phone not found by software then do next steps:
Go to Menu->Settings->Applications->Development.
Turn on "USB Debugging" option.
When message is appear press "Yes".
Searching for a phone. Please wait...
ADB server killed.
Firmware compiled date: Thu Jun 14 12:39:30 KST 2012
Android version: 2.3.6 (GINGERBREAD)
Detecting Screen Lock parameters...
Screen Lock detected: Google Account Lock
Resetting Screen Lock...
Phone will restart now
Reset Screen Lock successfully completed.
 

kaies gsm

:: Super User::, ,
إنضم
28 يوليو 2012
المشاركات
203
مستوى التفاعل
554
النقاط
0
رد: تجارب الاعضاء الناجحة فى تصليح و تفليش و فك شفرات الاجهزة على Octopus Samsung

تم بعون الله فك شفرة omnia i8350 العنيد بي نجاح علي العملاق Octopus



580257_633466263338897_625044845_n.jpg



1012403_633466313338892_911543545_n.jpg



1. Enter "##634#"
2. Input *#7284#
3. Select "Modem, USB Diag" option.
4. Press "OK" button.
5. Wait until phone restart.
6. Connect USB cable, install drivers.
7. Select diagnostic port in port settings.
8. Press "Unlock" button.

1075838_10200212835110742_2081496802_n.jpg



 
التعديل الأخير:

mouaed1989

عضو أساسي
إنضم
22 مارس 2013
المشاركات
127
مستوى التفاعل
459
النقاط
63
الإقامة
SYRIA
رد: تجارب الاعضاء الناجحة فى تصليح و تفليش و فك شفرات الاجهزة على Octopus Samsung

تفليش s5360

 

mouaed1989

عضو أساسي
إنضم
22 مارس 2013
المشاركات
127
مستوى التفاعل
459
النقاط
63
الإقامة
SYRIA
رد: تجارب الاعضاء الناجحة فى تصليح و تفليش و فك شفرات الاجهزة على Octopus Samsung

تفليش I9300


 

DZ-Developer

:: الإدارة R&D ::
إنضم
28 أبريل 2012
المشاركات
6,597
مستوى التفاعل
30,632
النقاط
113
الإقامة
الجزائر الغالية
فك قفل شبكة Samsung I9300

فك قفل شبكة Samsung I9300

idnLy.png


بيانات العملية:

كود:
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: GT-I9300
Searching for a phone. Please wait...
Phone found.
Firmware compiled date: Tue Jan 15 14:22:10 KST 2013
PDA Version: I9300XXEMA2
CSC Version: I9300OJVEMA1
SW Version: I9300XXELLA
Phone IMEI: xxxxxxxxxxxxxxxxxxxx
Phone SN: xxxxxxxxxxxxx
Android version: 4.1.2 (JZO54K)
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM1
Selected model: GT-I9300
Detected phone model: GT-I9300
Firmware compiled date: Tue Jan 15 14:22:10 KST 2013
PDA Version: I9300XXEMA2
CSC Version: I9300OJVEMA1
SW Version: I9300XXELLA
Phone IMEI: xxxxxxxxxxxxxxxxxx
Phone SN: xxxxxxxxxxxxxx
Android version: 4.1.2 (JZO54K)
Checking Root:
Phone is Rooted.
Reading security backup, please wait...
Backup saved as C:\Program Files (x86)\Octoplus\Octoplus_Samsung\BACKUP\Security-GT-I9300-Unknown30-12-2013_21-15-57-.asec file
Cheking security type...
Old security type is detected
Unlocking phone. This can take some time. Please wait...
Phone will restart now
Phone is successfully unlocked
 

machmach

عضو نشط
إنضم
13 يوليو 2013
المشاركات
61
مستوى التفاعل
82
النقاط
0
فك شفرة الهاتف c3500

فك شفرة الهاتف C3500


 

FaYsSaL_GsM

:: الإدارة ::
إنضم
15 مارس 2012
المشاركات
10,155
مستوى التفاعل
39,218
النقاط
113
الإقامة
Dzgsm
رد: تجارب الاعضاء الناجحة فى تصليح و تفليش و فك شفرات الاجهزة على Octopus Samsung

تم تفليش samsung jet s8000 بنجاح بعد عدة مشاكل وتصليح الثقل الموجود بالهاتف
welcome to octoplus/octopus box samsung software version 1.5.1
selected firmware file: S8000xbif1.oct
please switch your phone to the download mode and connect it to a
pc.
To put gt-s8000 phone into download mode you have to perform the
following steps:
1. Reconnect phone battery.
2. Press and hold "volume - " + "camera" + "power" buttons.
Searching for a phone. Please wait...
Found phone on com32
firmware write started.
Writing boot\boot_loader section...
Writing boot\dbl section...
Phone will restart now. Please don't disconnect cable!
Writing amss section...
Amss section has been written successfully.
Writing apps section...
Apps section has been written successfully.
Writing rsrc1 section...
Rsrc1 section has been written successfully.
Writing rsrc2 section...
Rsrc2 section has been written successfully.
Writing factoryfs section...
Formating factoryfs partition...
Formating successfully compleated
factoryfs section has been written successfully.
Phone will restart now
firmware writing successfully completed.
 

FaYsSaL_GsM

:: الإدارة ::
إنضم
15 مارس 2012
المشاركات
10,155
مستوى التفاعل
39,218
النقاط
113
الإقامة
Dzgsm
رد: تجارب الاعضاء الناجحة فى تصليح و تفليش و فك شفرات الاجهزة على Octopus Samsung

تم فك شفرة e2230b
platform: Samsung infineon
selected model: Gt-e2230
selected port: Usb
phone must be off, and battary must be fully charged
please, connect usb cable and reconnect battery.
Connecting...
Phone found.
Sending loaders...
Sending preloader...
Preloader send successfully
sending mainloader...
Mainloader send successfully
reading codes...
Calculating codes. Please wait...
Pck :#0141*00000000#
nck :#0111*35446442#
sck :#0121*00000000#
spck :#0133*00000000#
mck :#0199*37707625#
insert sim card and type codes.
Reading codes successfully completed.
 

FaYsSaL_GsM

:: الإدارة ::
إنضم
15 مارس 2012
المشاركات
10,155
مستوى التفاعل
39,218
النقاط
113
الإقامة
Dzgsm
رد: تجارب الاعضاء الناجحة فى تصليح و تفليش و فك شفرات الاجهزة على Octopus Samsung

تم فك شفرة samsung galaxy 2 i9100 بنجاح
Welcome to Octoplus/Octopus Box Samsung software version 1.5.2
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM171
Selected model: GT-I9100
Searching for a phone. Please wait...
ADB server killed.
Phone found.
Firmware compiled date: Fri Aug 24 11:37:38 KST 2012
PDA version: I9100JPLPJ
CSC version: I9100OJPLPH
SW version: I9100XXLQ6
Phone IMEI: 352944056675518
Phone SN: 00000000000
Android version: 4.0.4 (IMM76D)
Unlocking phone...
Phone is successfully unlocked
 

Radouan_Sala

مراقب البوكسات والبرامج المحمية
إنضم
18 يناير 2013
المشاركات
2,124
مستوى التفاعل
7,310
النقاط
113
رد: تجارب الاعضاء الناجحة فى تصليح و تفليش و فك شفرات الاجهزة على Octopus Samsung

فك شفرة سامسونغ s5230

Cne86D.png
 
أعلى